Viewing all customer Discussions for:

70-106 Jalousie Stretcher Clip

I'm trying to find these old screen turn clips for my sunroom Windows. Anybody able to help find these or something else I can use as a substitute?

Moved into home with older storm doors with this style of retainer clips in uploaded pictures. There's 2 different styles of clip in the pictures. The first two pictures are a white metal clip and third picture is a white plastic clip with thumb screw I believe is the original clip because it has te ... (cont.)

Looking for 12 clip assemblies to hold screens on Jalousie windows. Clip overall length is 1-3/8". Tip is clip where it engages the screen groove is 1-1/8" to C/L of mounting screw.

Replacement Operator and Screen Clip

There are no markings on this part. I have been unable to find these anywhere, including Ace Hardware, Lowe's or Home Depot. The clip is approximately 1 1/2" long, 2/3" wide, and depth of clip approximately 1/4". The screw is extremely small at approximately 1/4" long. I would certainly appreci ... (cont.)

Do you sell plastic Knurles Screws for Jalousie window Stretcher clips? I think that is what they are called. If so, how much are they? Thank you! Patty

Need help replacing window cranks. No numbers, but one long rectangle indentation on the face of the crank. I also have trouble hanging the storm windows/screens each spring & fall - the clips are old and screws are stripped and nothing seems to line up right. Could you help me find something that ... (cont.)

These are the plastic clips that hold the storm or screen panel in place. There are two on each side and one on the top. The clips are 1/4" high from the bottom of the clip to below the little rim that surrounds the thumb screw channel. The clips were also made without the rim.

Good morning! Please take a look at both pictures, one of them has a replacement crank for the windows and the other is the one that needs to be replaced. You will see the arm is stripped and I am not positive of how to replace this. It appears that there are replacement cranks(Gray window crank in ... (cont.)

Hi - We've moved into a 30 year old house and don't know (or see marked) the manufacturer of screen door. We would like to find 8 plastic (or white metal) clips similar to attached photos. Thanks for any suggestions!

No names or markings are visible on the part, but I have included all dimensions as well as photos of the clip installed and removed. The original part was supplied by the manufacturer of the storm/screen door, but they are no longer in business. I am looking for replacement clips that will be ... (cont.)

Looking for part number for clamp to hold screen in casement window. The only label on the window has the numbers 207700 001 CONDOR CA BR 28 Thanks for your help

Hello - I just purchased dome "stretcher clips" from you for my screen door. They are too small. Do you have anything bigger? Dean T

Have aluminum frames with glass panel inserts,held in place with different style clips.....my question is finding the right clip.... And how to replace the screw hold(some screws have snap off in the hole, Thank you for any help in this matter

Hi, I have a bank of old jalousies that are perfect for a three season porch that i want to keep. Over the years, some of the screen/storm clips have been lost, and I have had no luck finding replacements.

Hi, screen frame corner: . plastic . 1 and 1/4 inch long . 3/16 by 3/16 body . characteristics .. winged tab that extends to 1/4 inch, one side only on top .. ridges (6) screen/door clamp: . 1 3/4 by 5/8 inch . screw is 1/8 in diameter . aluminum (very pliable) Thanks

I am searching for a replacement storm/screen door panel clip that is similar to the attached photo and sketch showing all dimensions. The one item I have seen on your web site that is close to the size I need is your item #70-074. Do you have a larger version of 70-074 that is approximately 1 ... (cont.)

You offer a part 70-074. It is 1/16" x 13/16". Do you offer the same thing in 1/16" x 15/16"?

Are the 70-106 clips available(or can they be made)in a 2" length?