Viewing all customer Discussions for:

81-056 Patio Sliding Glass Door Roller

Need to find these rollers.But I don't know what manufacturer the door is.

I need two of these please.

caartridge: 3 1/8" long (not including wheels) cartridge: 11/16" width to outside cartridge: 1 1/16" high wheels: 1 1/2" diameter material: all metal - prefer premium stainless steel if you have em.

Hello see attached photos for part identification

I need to sliding glass door trucks

Looking for replacement roller for glass sliding door

Homeowner, need two roller sets. Pat

No markings on rollers. 23 mm between centers of the 2 screws. Thanks

Good afternoon, I'm looking for replacement multi wheel assembly for a house I'm currently remodeling. Please let me know if the information I have sent is adequate. Thank you

Need 2 roller units- look pretty standard- 1inch steel wheels/ about 5/8" wide, 3" longjim rollers have been cleaned, lubricated, and reinstalled- door works lots better but I would still like new tollers

The roller diameters is 1 inch. I can't find a name or part number on the door or on the roller. Home Depot has no tandem rollers smaller than 1 1/8th inch.

Hi I am looking for a replacement for these ~35 year old rollers. They don't have any marking but they came out of an aluminum door with an open bottom to the frame (apologies I didn't get any installed photos). They have 4 embossed nipples on the side that made them a bear to remove, and they are ... (cont.)

I can't find a name or number anywhere on the door or the part.

Can you identify these?

Need 2 door rollers - tandem 1 1/8 inch rollers 1 In wide at tabs Body 3 1/16 long frame 1 1-16 tallDan

metal wheels

Wheels are 1.125" diameter. Frame is about 11/16" thick. It's about 7/8" thick at the flared section. Overall length from mount hole to end of wheel is about 4.5"

My sliding door states that it was made by Western Insulated Glass SGD-C30

Looking for replacement rollers. House was built in 1993

This is off of a 2012 Clayton mobile home sliding door. There are no markings I can soon, on the door or part.