Viewing all customer Discussions for:

81-056 Patio Sliding Glass Door Roller

Cleaned and attempted to reinstall the old patio door rollers - still having issues - so decided to replace them both. Diameter - 5/8" Height - 1 1/16" Wheel size - 1" - double metal wheel.

Hello, I need four of these rollers for my patio doors asap - many thanks, Paul

I'm looking for Replacement rollers. I see one that is close but doesn't have my flares. my diameter is 1.12 inch, and the replacement one that I see is either 1 inch or 1 1/4 inch

Attached are pics of wheel assemblies that I am having trouble matching. I could have sworn you carried them at one time but I no longer see them on you site. The distinctive feature is the two flared cut-outs on both lower sides of the assembly. I have ordered a package of 1 1/8" wheels & several p ... (cont.)

Metal is all brass. Old measurements (some wear may have occured?): Wheels measure 1-1/8" Housing meaures 3-1/16" long, 11/6" wide, 1-1/8" deep Flange has hole, not slot, and is above the housing

11/16" W 1 1/8" H Wheel diameter 1 1/16" There are no markings on the hardware. It is from a slider in a Four Seasons Sunrooms sunroom.

I need 4 roller assemblies depicted above. I don't have pictures of it installed, I just didn't think of that.

Glass sliding doors, tandem wheels with mount tab on top of wheel fre

no markings, numbers, etc it looks like one featured in your video, but am unable to find anywhere else online 5/8" wide 1 1/16" high the hardest feature to match is the screw hole that jets up and out, any help is appreciated!

I believe it's a four season slider glass door it's over 25 years old

I'm looking to replace the wheels in my sliding patio door, can you please help me identify?

I have been unable to locate a replacement part for this roller at all the big box stores and specialty door stores don't have it either. The problem is shown in the second picture where the distance between the two screws is significantly larger than every replacement part sold nowadays. I neglecte ... (cont.)

Hello, I'm looking for tandem rollers for an interior commercial sliding door (manufacturer unknow). The issue I'm having is the housing of the existing rollers is only 1/2" wide. There is one single installation tab on the end. Any thoughts or ideas? Thanks Monty

looking for 2 -double rollers for metal framed greehouse slider no brand found anywhere, no markings on rollers

These rollers are in a high rise condo unit. Heavy duty 8' tall doors. Small entry to replace rollers that must be set at top of bottom channel, center cutout and about 1/2" width. I've tried multiple other options, like 81-164. This is the closest, but still does not sit correctly. Thanks ... (cont.)

I am looking to replace both rollers and add a track cap as mine is very worn.

I have a 4 seasons sunroom built in 2000. I need replacement rollers for both doors. I didn't see any numbers or markings on them when I had them out and I can't find any numbers in the paperwork that came with the sunroom. They are adjustable with metal wheels.

It has dual 1" dia. wheels.

Housing: 3-1/16 in x 1-1/8 in x 11/16 in Wheels: 1 in

I am looking for replacement rollers for a Four Seasons Sunroom sliding glass door. No markings on the rollers. I have tried a other rollers but when installed, the wheels would not clear the sill of the track.The side panel of the door frame has a sticker with Series 230 SGD SGD-R20-73X81 ... (cont.)