Viewing all customer Discussions for:

81-056 Patio Sliding Glass Door Roller

Four questions: 1. What is adjustable about the 81-1732 that is not adjustable on 81-056? 2. What are other differences between these 2 parts? In the diagrams, I see only a 1/16" difference in height (1 1/8" in the 81-056, versus 1 1/16" in the 81-173)? 3. What else should I know to help me cho ... (cont.)

From Milgard 1993 patio glass door with dual pain window 7/8 inner roller diameter.

these rollers are from a 48" x 94" glass slider width = .7" height 1" length 4 1/2 " wheel material steel no markings on part

Name on the wheels says Production Enterprises Miami Florida, but I am unable to find a model or part number

Sliding doors rollers. I need two. I've purchased from Swisco numerous times. Felix

Do you have the rollers and track for this door brand? Rollers are 9550062 Track 9500090 Thank you.

I need help Didn't realize that there were so many different ones

The side brackets that contain the two rollers measure 3.16 long x 1.06 high x .69 wide. There are two rollers that measure 1.25 diameter. The center distance between the two rollers measures 1.69. The rollers are steel with roller bearings inside. I did take photos on my phone but I am sending thi ... (cont.)

i did not find any markings these pictures are all i have

metal wheels, 1 inch and 1/16 diameter wheel, 3 inches long

Replacement rollers for 8'x3' sliding glass door I measured the roller unit: 31/8" long 1 1/16" high 11/16" wide 1 1/4 diameter of roller

We need to replace these rollers asap. 1-inch dual rollers. The casing body is L=3" x W=5/8" x H=1". The flange on the bottom is 1"L X 1" W. The mounting screw tab extends above the casing as pictured. There are no markings and we don't know the door manufacturer. The door is 20 years old and as ... (cont.)

Some of my 2 sliding doors rollers are not working smoothly. Those may need to be replaced. Please let me know if you have the right type and let me know how much it cost. Thanks!

Do you carry any units that can match my door rollers ? Thank you

Hello hope you have this in stock. Wondering if you have the long screws to hold the wheel and frame in place . Thanks Israel Prominent Doors and Windows

Hello, I am in need of help in properly identifying the correct replacement rollers for the bottom of my sliding glass door. Despite cleaning the old rollers and using break cleaner and a brush etc to clean all the junk out of their metal ball bearings a month or two ago, the door has been back to b ... (cont.)

3 patio doors, 2 bottom assemblies per door. 1 1/4"steel double wheels. outside of frame appears to be just shy of 11/16". Assemble frame length is 3 1/8", 4" including wheel that extends past frame. Frame height is 1 1/8" Two screws hold in, one screws into a nut, the other screws through frame ... (cont.)

The wheels are 1" tall 1/4 wide

Patio Door is 8' tall slider - about 25 years old. There are no markings on the roller assembly but it appears to be very similar to the 81-056 unit in your inventory. Dimensions on the image are approximations as I had to calculate from the platform the roller is laying on in picture. I didn't m ... (cont.)

Housing width 11/16" height 1 1/16" length 3 1/8" roller diameter 1 1/8"