Viewing all customer Discussions for:

81-056 Patio Sliding Glass Door Roller

Hello, I am in need of help in properly identifying the correct replacement rollers for the bottom of my sliding glass door. Despite cleaning the old rollers and using break cleaner and a brush etc to clean all the junk out of their metal ball bearings a month or two ago, the door has been back to b ... (cont.)

3 patio doors, 2 bottom assemblies per door. 1 1/4"steel double wheels. outside of frame appears to be just shy of 11/16". Assemble frame length is 3 1/8", 4" including wheel that extends past frame. Frame height is 1 1/8" Two screws hold in, one screws into a nut, the other screws through frame ... (cont.)

The wheels are 1" tall 1/4 wide

Patio Door is 8' tall slider - about 25 years old. There are no markings on the roller assembly but it appears to be very similar to the 81-056 unit in your inventory. Dimensions on the image are approximations as I had to calculate from the platform the roller is laying on in picture. I didn't m ... (cont.)

Housing width 11/16" height 1 1/16" length 3 1/8" roller diameter 1 1/8"

No names or markings on the roller. It is a tandem, adjustable roller. The wheels are metal. The wheel diameter is approx. 1 inch. Width is approx. 5/8 inch. The height is approx. 1 1/4 inches, but adjusts to 1 3/4 inches.

The marking on the side says delta 2185

please id roller hardware

These photos were sent to me. I know I don't have the information described in the video but can we get info from the ruler as scale? Please help if possible with this info .

I got one replacement roller assembly from the original installer, but I want a 2nd. They charged an insane amount for the one they sent me, so I'm hoping I can find the 2nd for a better price. You have a similar one on your website. But the wheel diameter is different on mine--not quite 1 1/8. Also ... (cont.)

These rollers are from a Fleetwood Window roller

Thanks!Brett

I measured width 11/16" Height 1-1/16" Diameter of rollers 1-1/4" 2 rollers Metal rollers Bracket was held in door frame by the metal tabs. No screws

How do I know what size wheel?

I need 1-1/8 in OD steel sliding door tandem roller assembly with F-Tab see photo I need 3 sets for three doors or replacement rollers for all 3-doors(12) wheels

Hello, Can you please help me identify and order replacements

Looking for these units to fix a drive through window at a fast food location. Thank you for your help. Best, Thavee

Replacing old roller assembly on my glass patio door. The rollers installed in the door did not have any fasteners holding them in but they were stuck in there good, seems like the dimples were holding the assembly in the track that I included a picture of. The wheels are 1 1/8 inch. Would be great ... (cont.)

No names or numbers on any parts.

No label or markings on sliding patio found. Installed in year 1982. Not sure but maybe a Marvin product?