Viewing all customer Discussions for:

81-090 Sliding Door Roller, Concave

Only info I have is in the photos, need two , thank you

I have 6 older metal sliding glass doors that need their rollers replaced. Unsure on which model to replace them with.

I need to replace these rollers in my sliding glass doors. I need 4 of them. The dimensions are: 2" long 1" high 1/2" wide Tab 3/8" long 3/16" wide

Hi Do you have a similar wheel roller The measurementsWheel dia 11/4 inch17/8 long 1/2 inch wide, 1 inch deep Thank you

There are no markings identifying the hardware. The wheel that was attached was rotted. The sunroom company was Better Living installed about 25 years ago.

Better Living door roller. 1/2 inch wide 1inch tall 2-3/8 long

dimensions are: roller - 1 inch diameter, steel exterior housing length: 1-7/8 inch width: 1/2 inch depth: 1 inch Inner housing length: 1-15/16 inch width: 3/8m inch depth: 1 inch

Can't find any markings on rollers.. a couple pics have measurements, but the roller frame is bent so the measurements are probably skewed a bit. House was built in 1981. Any help would be GREATLY appreciated!! Randy

I could use a dozen of these. Four are needed. Robert

Hi there. I spoke to MI windows and they said the patio door is an MI 950 series it is a discontinued model. I am in need of replacement roller assemblies.

Width 0.557" Height 1.050" Fixed portion length !.925" Wheel Diameter 1.25" Wheel ID 0.250" Wheel is marked "Production Enterprises, Miami, FL"

I need 2 of these. Both the roller and the body are steel. The door is old so all the markings on the glass are gone. There are no markings on the roller.

Have not been able to find something with the correct width at .52in or 13.5 mm. Have provided 4 pictures with measurements. Thanks

Last photo marking A-S 8193

1 15/16 long stationary part 1 1/8 steel roller 7/16 wide

Approximately 1/2"x1-7/8"x1". Roller Diameter 1-1/8. Need 4 each.

Hi. Needing to find a replacement for the sliding door hardware. The wheel broke off. The wheel is 1 1/8 in diameter. The housing is approximately 9/16in wide and 2 1/4 in long at the shortest adjustment and 2 1/2 inch at longest adjustment. Unfortunately there are no markings on the door or hardwar ... (cont.)

Need to identify this particular metal roller which screws into the bottom of my wood sliding screen door. Thank you in advance for your assistance.

Need 4 of these. 1 1/4 dia 9/16 width, 1 3/32 height, 1 7/8 length of outer metal piece, 2 in length of inner piece holding roller

1/2 inch wide 1 1/4 inch high