Viewing all customer Discussions for:

81-090 Sliding Door Roller, Concave

The outside ring of the circle is 1 1/8 These are two different "housings"? (not sure what they are called) but as you can see the lower one has a rounded shape on the left corner...cut out. I need to match just one style for a balanced door. Thank you!

I have a Better Living Sunrrom and need to replace the sliding Glass Door rollers. I've attached photos with dimensions. I hope you have something that will replace these.

Hi. I need help identifying this roller. It's in a three season room, thin metal frame glass door. Another screw secures it into the channel. I believe I need uppers and lowers for multiple sliding sections. Thanks John

Height 1 inch or 1 1/16 Width 9/16 Roller can pop out and is 1 1/8 Roller thickness is 5/8

The part is from a door that is at least 20 years old. It is a metal slider with no identifying information. Both the front and rear rollers are faulty.

Looking for the rollers for a Gaurdian sliding door. Thank

I need a pair like these or a replacement that will work

Hi. Can you tell me if the attached photos will be a match for your part 81-090 Roller Assembly. The housing Assembly width is 1/2". Thank you. Jim

Roller is 2 1/4 long, 3/8 wide and a 1 1/2 ttall from base to bottom.of wheel

I haven't been able to find the exact one didn't know if I could use a different type of more wheels as long as it's so high just need help finding something that I work for the door

Door rollers for a 2001 3780 roller.

Good afternoon, Looking for replacements for the photographed roller. I was looking at the 81-090 and the 81-290, but the measurements are not lining up. I am looking for a roller with a housing thickness of 5/8", as anything under that is not working out for me.

Just seeing if you can help me with this part

These came off my boats cabin door. Replaced them more than 10 Years ago, but cannot recall where I bought them. Definitely are patio door hardware though. Metal wheel, 1 1/8" diameter, Two of these guide the cabin door bottom

The dimensions are as follows:Width - 1/2 inchHeight - 1-1/32 inchLength - 2-1/2 inchesDiameter of wheel - 1-1/8 inchWheel is concave, metal and has ball bearingsNo identifying marks on the assembly or door. It is a sliding door in a four seasons room Assembly is held in place inside An aluminum U ... (cont.)

My door is very hard to close and open. I can't find any bane on door to know brand. The screws to adjust won't budge u less u know how to get them to more or have a special tool. We tried spraying with silicone but still no luck

1/2 wide, 1 1/8 tall, 2 1/2 long plastic 1 1/4 wheel

There where no names or numbers on this door. It's a thin style sliding door that's less than an inche wide. Looks like a door out of an old mobile home.

Hello,I am starting a project of trying to repair sliding patio doors. I believe the door is original from 1978. The setup is 5 doors, (from outside in) 2 identical plexiglass patio storm doors (pictures attached), 1 screen door, 2 glass doors (1 has never moved). I believe the glass doors also ... (cont.)

I think an 81-007 is the correct part but I just want to double check on the overall length and wheel size. Thank you so much.