Viewing all customer Discussions for:

81-093 Sliding Door Roller, 1-1/8" Concave Wheel

Please give the height (not including the wheel), width and length of parts 81-083, 81-093, 81-056, 81-153, 81-155 and 81-095. Thanks! I need new rollers but without this information I can't figure out which of these will fit my door!

Have found several things similar to this in my searching online - but the notch along the top doesn't match up to anything. Also, not sure if the flared ends are normal for the assembly or if I somehow bent the assembly trying to pry it out of the door. Del Mar and Long Beach Cal. are imprinted on ... (cont.)

Good Day I NEED A STEP BY STEP DIAGRAM OR VIDEO HOW TO ATTACH NEW WHEEL,I HAVE REMOVED ALL IN SUNDRY,BUT AM STUCK GETTING NEW WHEELS INSITU. KINDLY ASSIST. SINCERELY JEANETTE

Could you help me find a match to one of your Patio Door Rollers if you have it available. It has a single 1 1/4 inch roller, is about 1 1/8 inch tall and about 2 1/4 inches long. Has 2 dimples on the sides as shown in picture. I really enjoy using your great window screening products. Thank you, ... (cont.)

My local repair shop quoted me a replacement with a tandem wheel. My door has a single wheel. I ordered 81-093 which appears to be a virtually identical part and should slide in nicely. From what I can tell, there is plenty of room to slide a longer housing in, like one that would use a tandem wheel ... (cont.)

1 1/4" steel rollers. Del Mar Engineering, Long Beach CA., Patent #678387

Hello...this roller is from a Viking door. It measures approx: 2.625 length x 1.25 width, and 0.625 thickness. I have included a pic of the only sticker I found on the door. Thanks for your help.

1 ? diameter steel wheel 2 ¼ long assembly 1 3/16 height

Hi- I have a sliding glass, patio door that has been in my house since it was built in 1981. The door is really grinding at this point. I cannot find the exact roller replacement anywhere. I've looked through your images (thanks for that) and there's this one: https://www.swisco.com/Sliding-Door-Ro ... (cont.)

I just need help locating a replacement part for the roller pictured above. I have two sliding doors with two rollers each. Doors are at least 20 years old. Thanks!

Please help me figure out the best replacement parts for my patio door. Thanks!

I need several sets of these. I have a customer who needs them.

I would like to get 2 replacement rollers each with 2 wheels instead of one. 4 photos attached. My roller units are 1 inch wide including the nipples. the frame is 1 3/16 inch deep and the wheels are 1 1/8 inch. Also i would like to replace my 70 inch track because it is in bad shape. ... (cont.)

I took these out last night out of my sliding glass door I'm not sure what make or model it is.

Part 81-243 looks almost identical except it is taller (1 7/16 as opposed to 1/3/16. The space where the roller inserts is 1 3/16 so the taller roller will not fit. Door is about 44 years old.

My sliding door roller looks just like Swisco's 81-093, except Your description says the dimples are 7/8" wide, but the description also says your dimple width is 1". Which one is it? Mine looks like it's 15/16" at the dimples.

Greetings, I have a Del Mar Roller assembly from my sliding glass patio door that needs to be replaced. It is removed from the side of the door instead of coming straight out of the bottom. Other than 'Del Mar' the only marking is a patent number: 3.670.357

I removed this assembly from a working door. Yes it is rusty but it works. I looked on the website but I could not find an exact match. Can you please review the photos and let me know which assembly will work. Has some markings on it DEL MAR ENG. LONG BEACH, CA PAT 3,670,357 Thank You Bil ... (cont.)

Dear sirs, On page 12 of the pdf I've attached, has this roller model number below. And I could be wrong, but I think this maybe the correct one. Can you please advise? Thank you so much! Best regards, Jonni

I am looking for rollers for a 30 year old Merzon sliding patio door and a 6 foot track cap