Viewing all customer Discussions for:

81-237 1-11/16" dia Nylon Concave BB Wheel

Hi, I'm looking for replacement rollers for my mom's sliding glass door. The aluminum glass sliding door has two rollers and uses a pin through the door Nd the roller to lock into place. Do you have anything for this

Wheel O.D. Is 2", width is ≈7/16". The assembly bodies seem much simpler than most of what task carry. I think the door is from the 50's.

Original 60's era heavy aluminum sliding glass door. Need to replace rollers pictured. No markings on door for manufacturer or anything else. Roller says 'General Bearing Mineola NY'. Roller wheels are 1 11/16 inch diameter, and 7/16 inches wide. I think with a 1/4 inch roll-pin axle about 3/4 inch ... (cont.)

I am trying to find replacements wheels for my 8 foot glass patio slider doors. The dimensions are length 2 1/4 inch Height 1 5/8 in Width 7/8 in and wheel diameter is 1 3/4 in This house was built in 1959 in Northern California and ChatGPT seems to think it is from the Arcadia doo ... (cont.)

Measures 2" tall 2" long and 5/8" wide wheel is steel and approx 1-3/4"

I am looking to replace this part which is from an older patio door. The wheel is 1-1/2" diameter, 3/8" wide and the hole in the center is also 3/8". I could just do the wheel if not the whole part, but i can't seem to find one that has a steel bearing and nylon/plastic outer wheel part. Thank you ... (cont.)

Trying to find this roller (2) . There is no adjustment on this and just a drift pin that holds everything together. if you need more information please let me know. Don

I have a patio door with an unusual roller. The height is adjusted with an inserted aluminum piece that rolls over an angled shim. The shim (or wedge, or cam, or whatever it's called) has a flat side with Do you have a replacement for this wheel assembly?

We have 12 sliding doors that have become difficult to slide because of flat spots and wheels no longer turn. The doors are 12-13 years old in an island environment. Do you sell such a door part?

Closet door is brass and glass. Not sure of the plastic roller is replaceable or if I need a new unit altogether. Case is appox 0.58" wide, 2.32" long (looks to be adjustable), and 1.05" tall. Unsure of roller diamter but has a marking of C-Co on it if that helps.

I'm looking for a replacement for a broken patio door top roller. The screen door hangs from two rollers mounted on the top of the door. The bottom simply has a plastic guide that fits around the bottom track.

No identifying letters or numbers on the roller.

Hi - I'm looking for replacement rollers for this door. Any help appreciated!

The wheel is 1 3/4 Diam 5/8 thick nylon the hub /bearing assembly is 3/4 outer diam , roughly 1/4 inner diam and 1 3/16 long i believe the door is a acorn door but no actual markings probably from the early 70s

Dimensions 2-1/8" longer 1 3/8" high & 3/4" wide

Need four replacements. Thanks

Need a Roller. Thank you.

Hello, I'm hoping to find a replacement for the damaged part that you see in the photos uploaded. Any help would be very much appreciated... The stamp on the wheel is Kilian - Syracuse - Toronto and that's all I can decipher as it is mangled due to the size and weight of the door 60"w x 78"h Weight ... (cont.)

older door roller. thank you for any help you can offer.

81-116 : 1-3/4"dia Replacement Nylon Concave BB Wheel I have sliding wooden doors I need to get new wheels for. Previously I'd gotten 81-116 : 1-3/4"dia Replacement Nylon Concave BB Wheel But your site says they've been discontinued.