Discussions for 82-002 : SWISCO.com

What is the difference between Mod 82-002 and model 82-008? Thanks Ray

What is the minimum door thickness for this lock? I bought a similar one only to find out my door was too thin. Most doors are 1" thick or thicker, mine is only about 7/8" or 2cm thick.

Keeper Option for Part 82-002 and 82-002K

I want to install a Patio Slide Handle Set / Key Lock #82-002K. Will the Crossly Keeper # 89-006 work with this handle set?

PGT sliding glass door rollers and handles fromthe early 1990s

Hello, I need rollers and door handles from my early 1990s PGT Sliding glass door. Can you please call me

+1

Sliding door lock stuck in locked position

I cannot get the lock mechanism to move and the lock is stuck locked so I cannot access the door edge. Is it possible to unlock by removing the screws holding the lock cover in place? Also can you recomend a replacement part

Handle and Lock info needed please

Hello, I am looking to replace the locking handles on 2 products from what appears to be the same vendor, just not sure who it is. Attached are photos, let me know your thoughts. The info on the glass simply says Gaurdian, but I think that may be just the glass company for the units. The product ... (cont.)

+2

Patio lock

I would like to replace my patio locks and still use the above handles

Handle/ hardware for a Guardian slider

Looking for a replacement handle for a guardian slider. Stamp on the slider says Guardian ANSI Z97.1 - 1984. Stamp is shown in one of the pictures. Thank you! - Ben

+2

Sliding glass patio door

Black hardware with offset handle. 7 9/16 hole spacing

+1

Patio Door Diecast Lock Needed

Patio Door Lock Needed to Include angular Handle Stand offs (2) and Requisite Handle. You can call me direct Jeff

Sliding Glass door handle.

Sliding Glass door handle. Opening is 8" Tall for hardware.

+4

Sliding door lock

I need a new exterior part of the sliding door lock.

+2

The part I need. It fits a sliding glass door. The first image is the inside; the second image is the outside, and the third is where the lock fits. Thank you for your help. I really do need a rep

The first image is of the inside; the second image is of the outside, and the third image is the lock part that is broken.

Sliding Door Handle

Looks like someone broke off the latch. I need a replacement or something else that uses similar hardware.

Replace rollers and handle/lock on sliding glass door

Door lock has "Sullivan and associates " stamped on it. Roller replacement kit?

+2

Need one

I need a basic builders grade patio door flush handle in white, but for a door that's 1-3/4" thick. The lock I need looks just like the last picture but with an extra "step" where my pen is pointing to accommodate the thicker door. Measurement from screw to screw is 6-5/8". I've been unable to find ... (cont.)

+1

Patio Door Lock

6 1/2" between screws 1" between bottom screw hole and reversible latch screw hole 7 5/8" from top to bottom of lock plate 1 1/8" thick door

+2

DNS industries sliding glass door handle

I have a corroded and broken sliding glass door handle. DNS industries outside pull 13/25 that needs replacing. 16 inside pull. The part that says locked has broken off from the inside lever. It is an old sliding glass door in a condo built in the late 1980s

+1

DNS Industries 12 inside pull

I would like to buy this part from. you but am having trouble locating it on your site, its a DNS Industries 12 inside pull and I believe that the holes from centers is 6 1/2" apart. if you could give me the part number so I may purchase it that would be greatthank you Keith

+1

Door lock set

Measures identical to 82-008 but is white. One screw hole is stripped. Need replacement.

Viewing all customer Discussions for: 82-002 Sliding Door Handle Set, 6-5/8"

Viewing all customer Discussions for:
82-002 Sliding Door Handle Set, 6-5/8"