Viewing all customer Discussions for:

82-002 Sliding Door Handle Set, 6-5/8"

Sliding glass door pull is stuck in the locked position and cannot open unless I take it apart. Do you know or have parts for this type? Thank you, Kem

I have a sliding door that is 1 1/8" thick. I am looking to upgrade the handle lock assembly with something that at least feels more secure. I currently have an 82-002 with a handle set. Is it possible to replace a current 82-002 with a Mortise type lock assy?

need replacement hardware similar to your model 82-002 lock unit for my sliding glass door. Unable to locate a lock for my particular application--the door is 1 1/4 inch thick...non-standard I guess. Door was installed in 1997. Cannot use locally-available hardware as they are made for a 1 inch d ... (cont.)

I just purchased a home built in 2001. I have 2 sets of sliding glass doors, 3 panels each. I may or may not need rollers at this point, but I do need 4 new latch/lock assemblies. I tried to buy some from Lowes, and although they

Please let me know if you a replacement for this the hooking park on this one is set

Aloha. Can you identify the screen door lock from the attached photos? The part in the screen door itself has lost its little arm, the thing that would engage with the locking mechanism in the door jam. The photos are as follows: 1) lock mechanism on inside (locking side) of door 2) the thing i ... (cont.)

I'm trying to replace a broken door latch for sliding glass door for my mom, who is disabled. So the very important issue is needing a pull on both sides of the door. That tiny inset to put your fingers in doesn't count as a pull. The old one was a flush mount with an extended wooden pull on the i ... (cont.)

I am looking for a replacement sliding door handle and lock-set to replace the one shown in the attached photographs. The size of the existing lock-set is 7 1/4 inches by 7/8 inches. The center to center measurement between the two screws is 6 5/8 inches. The opening for the lock is 15/16 x 7/8 inch ... (cont.)

It's the handle that goes to the sliding glass door I can give you a specific number if you need it. Just tell me what you need

any idea what this part might be and how i go about installing a new one?

7 inches probably over 40 yrs old DNS Industries Miami Florida stamped in lower right side JAPAN It looks like the one posted 12/18/12 by David

Can we use 82-002 on a door that is 1 1/4 inch wide? We purchased a replacement lock and it isn't working. The patent on the original lock is RD-1968 CAN Thank you.

I am in process of emailing an order to SWISCO for several items that I need to repair 8ft aluminum glass slider. 81-005 single roller looks like perfect match and other items Mach as well. However, I am in need of several latch hook (labeled as "K") in your 82-002 lock handle set. I am ordering ... (cont.)

Can you provide more detailed measurements such as the height and width of the 82-002 sliding door handle set?

Re:- patio door replacement lock. I have a DNS industries 'outside Pull' which has a 13/23 stamp on it and on the 'inside Pull' has a 16 stamped on it. Do you carry this?

I am replacing what looks like the 82-002 for three sliders. I see the 88-002 for the interior handle. I want to also have an outside handle on the three sliders. I do not see that?

We need a replacement keeper for a sliding glass door. Information we have is that it is a TYCO 248 glass sliding door with hurricane impact glass. Below are dimensions of the keeper. Attached is a picture of the keeper taken from another door, and a picture of the door latch. 2-3/4 in. long ... (cont.)

Could you please help me to find a sliding door lock? The one that I have it says DNS Insdustries 12 inside pull standard. Thank you.

Hello, I need to know what would be the equivalent of the subject part? My door is 1 1/4 inches thick and the distance between both mounting screws is about 7 inches. Thanks for your help, John

It shows a size of 13/23 Please advice where I can find this to replace it or where can I find something similar which would fit DNS INDUSTRIES, MIAMI FLA 13/32 OUTSIDE PULL JAPAN