Viewing all customer Discussions for:

82-002K Patio Sliding Handle Set with Keyed Lock, 6-5/8"

pgt sgd-70 latch set I cannot locate a latch set that will replace my original. the problem is that the door thickness is 1 5/8 inches all the replacements seem to be for 1" or 1 1/4" door thickness you don't specify the door thickness on your web site. Where can I find one? this is a sliding patio ... (cont.)

need replacement hardware similar to your model 82-002 lock unit for my sliding glass door. Unable to locate a lock for my particular application--the door is 1 1/4 inch thick...non-standard I guess. Door was installed in 1997. Cannot use locally-available hardware as they are made for a 1 inch d ... (cont.)

I just purchased a home built in 2001. I have 2 sets of sliding glass doors, 3 panels each. I may or may not need rollers at this point, but I do need 4 new latch/lock assemblies. I tried to buy some from Lowes, and although they

Hi See attached photos of handle off an old sliding door. One of the bolts broke out of the side with the key. No markings or names that I could find anywhere. Overall length of wooden handle is 10 inches. Mounting holes are 7 7/8 inches center to center. Any idea what brand door, and if ... (cont.)

I need a new lock for a sliding patio door. Inside it is marked DNS Industries 13/23 outside pull.

It's the handle that goes to the sliding glass door I can give you a specific number if you need it. Just tell me what you need

I am looking for a flush mount slider lock with key. My opening is 9 inches x 1 inch and the door thickness is 1 inch. Do you sell anything in this size or some type of filler bracket. Im looking for something in a brown finish. This lock set cam off a 1977 silverton boat. Its a small sliding glass ... (cont.)

Hello, I need to know what would be the equivalent of the subject part? My door is 1 1/4 inches thick and the distance between both mounting screws is about 7 inches. Thanks for your help, John

Can I use an 82-002K on a solid wood door? Bruce

I have a patio door lock like the one in the pics I have attached. My desire is to have a exterior lock on it so I can enter from the outside. I was wondering if your 82-002K or 82-306 would work for my purpose. Thanks David

I'm looking for a replacement set for a sliding glass door that could easily be 44 years old. The interior metal portion of the handle reads "CROSSEY". The size of the handle is 7/8" wide by 7 1/4" high. The pictured handle is marked "DNS INDUSTRIES MIAMI, FLA" and "JAPAN". The key cylinder is stamp ... (cont.)

Hi, I have a 1.5" thick sliding glass doors. Can you suggest a tumbler lock for it? My handle is black and looks a lot like your 82-002K Thanks, M.

I want to replace my sliding glass door lock with a keyed lock. The measurements of the exisiting lock are the same as Item #82-002K but as shown in the attached photos, the inside sliding knob to lock the door is at the bottom not in the middle. There is no double lock feature on the existing unit. ... (cont.)

I just received my order for a 82-306 Keyed Exterior Sliding Door Pull. Just curious before I start if the part will match with the interior sliding door plate and opening slider. Picture of the inside attached. If the part does not work with the inside plate, do you have a compatible inside plate ... (cont.)

Product code 82-002K. After placing the 82-002K into the checkout cart it showed a related item,( key tumbler #82-302). if this is the key tumbler that goes in the 82-002K handle set it does not appear to be long enough at 1 inch? Is the key tumbler in the 82-002K longer? Thanks,David ... (cont.)

I need six replacement rollers and two handle sets for 1970 alumn. patio doors. Sliding Patio Glass Exterior Aluminum Door Heavy Duty - 1975 +/- Vintage - Purchased in Boston I can't find any manufacturer's numbers or logos. It seems to be the same aluminum door as used on 1970's Deck Houses. ... (cont.)

I am looking for a replacement for the lock on the sliding door of a 1988 Carver Mariner Motoryacht. The 82-002K looks almost identical but I would feel more confident if you could provide more specific dimensions than just the distance betwen the screws...is that possible?? Many Thanks! Mike ... (cont.)

Does the 82-002k fit both left and right? I need two and want them keyed alike if possible.

I have ordered and received the 82-002K handle to replace the old and annoying handle in my sliding door. The handle looks like it is going to fit up exactly like the old handle but I am not really sure how to install the lock part of the handle. It looks like maybe there was a mistake at the factor ... (cont.)

We have 2 sliding glass doors on a Florida room and want to replace them. We ordered 2 patio sliding handle sets with keyed lock (#82-002K) and received them yesterday. The handles fit the doors properly; however, the pin on the end of the tumbler mechanism is too short. The doors are 1-1/4" and ... (cont.)