Viewing all customer Discussions for:

82-036 Surface Mount Handle Set, 6-9/16"

I'm looking for a sliding door handle/lock mech, made back in late 70's early 80's, handle and lock are one piece, inside and outside. Unfortunatley the handle on the inside broke, the lock shows a red dot when locked and a green dot when unlocked. The handle has a wood grain sticker on it, are you ... (cont.)

These parts are the locking mechanism for a Kohltech sliding glass door. If the locking parts are not available, do you have the complete handle?

Looking for a door handle for a sliding glass door that broke. This is the only information we could locate. The door handle itself is black in color. It's glued back on now with a welding type glue but it won't last. Do you have any replacement for this?

I'm looking to replace this broken handle. Please help me find the right model.

The handle for outside of door is broken. I want to replace both inside and outside lhandle .

royalplast ctg tempered 16cfr 1201 11 ans1z07.1-2004 need door stricker Hooper W.

Do you have a 6 5/8 inches sliding glass door handle set? I believe this door is at least 20 years old.

New problem...The Distance between the two screws is 6.5 inches to center of hole.The distance to the opening where the lock mechanism ?slice? (with hook lock sticking out) is (1? opening) is 3? from the top and bottom of the handle. Everything still works, but the wood handle part connected to the ... (cont.)

I know it's a surface-mounted, roughly 6-5/8" hole spacing door handle with a key but can't seem to replicate that in my searches for a replacement. Also, the outdoor side of the handle doesn't have much to grab to open the door, so I'm open to a different part that meets those specifications. On t ... (cont.)

Attached are some photos of the sliding door. The part we are looking to replace is the latch that connects to the handle. You will see in the photos that the latch is slightly damaged and not aligned with the door so it does not shut properly. The metal piece holding it has been bent from being sla ... (cont.)

The measurements are: 6 5/8 inch spread Lock hole is not centered. It is 2 1/2 inches from the top screw hole. I do not have the old set. Please let me know if you have a replacement. Thank you.

Handle is 7" long screws are 6 1/2" apart. Outside pull is broken. Non keyed lock gene Grossmick Stelwagon roofing supply

NFRC 100/200Code: TEIRating: NFRCMST: 6068 (DDSG)Need replacement lock (the horizonal middle piece). Please advise.

Hello, I recently purchased a home with a broken patio door lock and I have been having a difficult time finding a replacement lock. The door's label says it?s a NAMI "Opera Patio Door" series. I have attached some photos for reference. Thanks!

Need replacement handle with lock. Brand is a nami spec mst51168 sending all photos

My door handle needs to be replaced.

Hi, My name is Steve. As you can see by the 5 pictures attached, my patio door handle (on the outside) came off, and we currently have a temporary replacement. Do you have an exact replacement for the broken handle, and can you recommend someone in the Trenton area to install if for us. ... (cont.)

We are looking for a handle for our sliding glass door. The present handle is approximately 7" long. The door fits onto a plate with two pegs on it. There is no brand name any where on the door. The house was built in 2000. If that helps. Is it possible to replace just the lock mechanism? Please ... (cont.)

I can't seem to find anything printed on these parts. I took the lock off and looked on the back side. I looked all over all sections of the door and there's no manufacturer name even printed on the door. The customer would like to just order a new keeper but if we have to get a whole lock assembly ... (cont.)

Good Evening, I believe I need item 82-036, but seems to be reversed of what I need. My sliding glass door goes right to left, not left to right. Is this a universal part? Or is there another part number you can refer me to. Thanks! Tara