Viewing all customer Discussions for:

87-057 Peco Sliding Window Roller

Can you identify this wheel? It's out of a sliding window.Call me with any questions Thank you, JD

I need multiple rollers for these pacific industries sliders. I'd like to get rollers that will fit in the center of the larger slider for support to stop the sagging. Also need single hung rebuild kits for some windows. Please contact me as soon as you can thanks

I've been searching for the above pictured sliding window rollers. Would you have this part in stock? I can't find a manufacturer name on the window nor are there any identifying numbers on the part. I have a photo of the roller on the window but I didn't have enough room to send it. It's off set a ... (cont.)

My wife, Louise, and I purchased 16 bags of Pile Weatherstripping, 3/16" x 3/16", 58-002 in gray on 08/21/2021, order number 1702901 to repair our metal sliding windows. We are very pleased with your product. But, while replacing the weatherstripping, we noticed several of the plastic corner pieces ... (cont.)

I need a metal, flat wheel roller with the dimensions: 3/4" length, 1/4" deep, 0.4" wide, and 0.3" wheel. Tried your models 87-084, 87-014, and 87-012 none of which fit correctly

The lock has the words "Pacific Industries" on it. The house was built in 1998 and these are the original windows. These rollers install with one screw at the bottom leading corner of the window. Thank you for your help.

I ordered Peco Sliding Roller 87-057 from you. It isn't the correct size. Peco is the smaller roller in the pictures attached. I need help identifying the larger roller in the picture. The windows are about 30 years old. The manufacture name stamped on the frame is Western Products. Thanks for your ... (cont.)

HELP!! don't know the make or model number for windows. installed 25 years ago. I need either replacements for the end pieces (depicted in black) or the entire cradle with end pieces attached.

Please let me know if you can find this part thank you

I have a sliding window that has wheels under it and 1 of them is missing can you help me find a new wheel.

Rolling wheel at the bottom of the window.

Hello, I have sliding windows in my room. I realized that they are not closing properly because the rollers on the bottom are worn and causing it to sit unevenly in the frame. The window itself seems to sit on top of this one piece roller that is not attached to the window, it just fits neatly on to ... (cont.)

1985 vintage. Wheel is missingi in pic

Can you please tell me if you have this part or a comparable match?

Do you carry any parts like the pictures attached. I have included a small schematic. Regards Mac

Wheel diameter is 1/2" Holder width is 1/2" Holder height is 3/8" Flange end width is 3/4" Flange end height is 3/8" Overall length is 1 1/8" Overall inside channel length is 1" Not sure if I can just replace the wheels or need entire assembly. Wheels are removable..

I have 2 DANVID slider windows (47X47, and 47x59) slider windows. The roller assemblies are worned out I need 4 replacements. Do you have any assembliew that are 1/4 inch tall 1 5/16 inch long, plastic housing & metal flat rollers. It is one roll per assembly. It is held in place by a 1 1/2 self t ... (cont.)