Viewing all customer Discussions for:

87-138 Keller Sliding Window Roller, 5/16" Flat Wheel

Hello, I'm looking for a window roller assembly that mounts to the bottom of a window. The housing is nylon and the roller is steel. The housing is 11/16" x 7/16" x 5/16" (WxLxH). Roller length and diameter are 5/16". Here is apicture of the roller and how it is installed. Please let me know if yo ... (cont.)

Hello and thank you for your help identifying this part. Unfortunately it's in pretty bad shape and there are no identifying marks that I see. Measurements can be seen in the photos. It's from an aluminum window original to the home built in the mid-80s

Flat Wheel - 13/16" long, 1/2" wide ans 7/16" high. In aluminum 1986 build. West Coast.

Roller window PN 2111D 7-M10-173

I looking for some bottom window guides. They maybe rollers but they look like guides/pads that the window rides on when opening and closing. I'm also looking for sliding glass door handles, lock Mechanism and door seals. I also need one of these locking arms. Please advise, Thanks, Rich ... (cont.)

Looking for a replacement. Wheel measures 5/16th across. The plastic housing is 13/16 back to front, 7/16th wide. The front lip (facing into house) is 7/16, the back lip (facing out) is 3/8 The retainer screw passes on the edge of the plastic housing, and it has worn a groove into it, near my t ... (cont.)

No markingsfound. Windows are approx 30 yr old aluminum metal clad.

The width and length is 3/4 inch and the height is 1/2 or 5/8 inch. It fits in the corner of my window. It is held in by a screw that also holds the frame of the window together. Thank you, Darin

The screw that holds the plastic housing to the frame only catches the lip of the plastic housing. Very odd. There is no hole drilled through the housing to mount it. I think you can see from the pics. Plastic housing for rollers has this number stamped on it 7-M10-173 I hope this helps ... (cont.)

KELLER SLIDING WINDOW ROLLER, 5/16" FLAT WHEEL, do you happen to know the screw size and type that was specified for the Keller sliding windows that used the 87-138 roller?

Window rolllers

I am looking for replacement Sliding Window Rollers With Plastic Housing For windows manufactured by Werner Windows of the USA durint the late 1980?s and early 1990?s. Might you be able to assist me?

we are looking to fix out window and this is the roller that was in it

We are looking for replacement rollers for aluminum sliders as pictured. We need the 3 different types of rollers.

Hello, I am in need of 40 of these items. I just wanted to know if they could somehow come with the actual wheel also. Or do you supply them separately?

A screw goes on edge w half circle. Side edge for screw is broken off.thx,been to many stores,no luck. Windows approx 25 yes old.

I am trying to locate these window rollers. Thank you width of roller is 1/2 inch

Looking to find about a dozen of these if possible, if you need more pictures let me know, Thanks, Pete

I see you have part# 87-138 which is one size I need, however, I need a smaller keller roller that fits a smaller sliding window. I hold it and measure it the same way your pic is for the above part # it measures 1/2" wide across the top and the length seem to be 13/16ths. The barrel roller se ... (cont.)

I have a roller that looks almost identical to your #87-138 but the dimensions are slightly wrong, do you have something similar or can you confirm that the website dimensions are correct.