Viewing all customer Discussions for:

90-005 Window Sash Lock, 2-1/4"

Not sure how it happened but all the window locks in the house (fathers house) are broken and need to be replaced.Please advise. Thank you!Mike H.

Replace window part

I'm looking for replacement parts for three windows

I need to replace two of these window latches. I'd describe them as dark bronze in color with holes measuring 2-3/8" center to center. There are no identifiers other than the VIKING brand name.

I'm looking for a krestmark lock for a sliding window. It has a 2.5" center to center on the screens. The latch itself is straight there is no 3/8" off set in it. See pictures.

Double Hung Window Lock. Photos show lock with broken tab and intact lock.

2.25 between screws Tongue is 9/16" Looks like a light almond,but white might be ok Handle has snapped off several

hole to hole on lock is 2 and 1/4

Hello! Looking to see if you happen to have this type of window sash lock? I took 2 photos of the lock, there are no markings. The other picture is one from the window, it is approx 7-8 years old. Thanks SO MUCH for your help!

a 2740 stamped in steel channel. Channel is 28 inches long. Lock is 2 3/4 inches long.

Cased window lock broke when window was moved down while while lock was in locked position

I need to replace the same Marshall sliding window locks that customer asked about from Monterey Park in 2017. You said to look at 90-009 or 90-005 is that a Marshall lock? Are they still available? Thanks

Hi, can you please help me identify a replacement part for the window locks shown in the photos? The aluminum non-tilt windows are from 1980s and use the 18" series 800 window channel balances (17B). Thanks ?Todd

The clip to open the window so you can tilt it in to clean is broken. Actually, I have two broken clips. Can it be replaced, if so do you have the replacement part?Lu-Ann

The latch is 3" long and the side clip a bit over 2". How much for them? Thanks!

alenco window lock, 2 7/8" long and 3/4" wide.

I'm not sure what series GA window I have, but the single-hung sash will not stay open. It appears the balance mechanism has broken. It has a 1/2" diameter rod. See attached pics.

The letters "G" and "A" are stamped on the latch.

Hello! We are looking for new latches for our 14/15 yr old windows. Manufacture Atrium... If you know where I can get them please advise! We are selling home and need to fix. total 4 latches are broken. Thank you, Tracy

I'm looking for a sash lock with the dimensions: 1/2" wide 2 1/2" long Patent number 5.138.291. Has R27 on the back.