Viewing all customer Discussions for:

17-056 Tilt Pivot

Around 1992

From a 1980's wood window

The tip has broken off of this sash pivot pin and I need to replace it. Inscribed inside is: A-S NYC 6254 1

Hello can you guys help me find the part, they are wood windows, the please let me thank you

I am looking for a pivot pin for a double hung window spring system.. the other hardware for this window from'70 or '80 are from Truth i am including a picture of the left side from the inside. Any help locating this or a reasonable replacement would be appreciated. the latches are not available ... (cont.)

The attached photos show a broken pivot bar for a wood window I have. The bar is screwed to the bottom of the window and the tongue fits in a piece attached to the spring in the sash. Both pivot bars are broken. Do you have a replacement part available?

These parts permit window tilting. Tend to be break at the screw mount

Don't have any markings

Looking for 8 of these. No identifying markings on window or sash pivot to identify brand. Thinking this could be a Rivco window based on some other features. Thanks, Kevin

I need a window pivot pin that is missing from one of my windows . The lencth of the piece is 1.5". there are 2 phillis screws that hold it in place. The "pin" is square shaped as can be seen in the picture of the pin on the opposite side of the windot. It would appear that these pins come in pairs ... (cont.)

Our house was built in 1979, I think the windows are Anderson, this is a picture of the sash pivot, the part on the bottom that slides into the window track is broken on some of the windows. I am looking for replacements, either the original or something that will work. Please let me know if you h ... (cont.)

These pivot pins, shoes, or whatever are from a double hung window. Possibly 1950's? but maybe newer?

Trying to find this item

This a pin that inserts into the balance glide in the sash. It is screwed to the lower inside of the window itself. The windows were installed at the time of construction by Ryan Builders an 1991. the material is pot metal and I have several of these broken in the same spot. If I can find them I cou ... (cont.)

Please supply me the part number for this pivot pin. I will start with 4 pins. My Best, Mike

The window manufacturer is unknown. Windows were installed when house was built in 1997. Lying flat as pictured it is 5/8" wide and 1 3/16" long. The depth is 5/8"

our windows 1988 - we need at least six of these spring hooks if available.

(1) 34 HDP Stamp (1) 34 DHP Stamp (2) 24 HDP Stamp (2) 24 DHP Stamp

The tilt pivots for this window were damaged by an attempted break-in many years ago. It's not a window that we operate much, but I need to get it operational.The tilt pivot metal is bent, and I am going to attempt to bend it back. If it breaks, I am hoping to find replacements so I don't have to ... (cont.)

this is a window balance from a Semco double hung inside tilt window. I believe its from around 1995.