Viewing all customer Discussions for:

91-003 Spring with Nylon Retainer

Hi do you have a similar replacement part?

Couldn't get mechanism out of channel without breaking piece. I'm not super mechanical anyway. It is three inches long, slot it fits in is 1/2 inch wide. Finger pull area is 5/8 inch long. It has a spring in it to pull back and forth. It has a slight angle on end where it fits into edge ... (cont.)

Does this latch include the spring or does the spring have to be purchased as a separate item?

Need a slide bolt for the above storm window. in picture #2 correct one is in storm and broken one just below. In picture #1 shows how it should be.

I've attached a photo of the locking screen parts I need. Do you carry them and if so, how much?

I see you have spring, do you have Swivel pins

I am looking for RH and LH replacement for storm door window latch. Label on door says National Pride National Nail Corp. I have attached pictures of front and back of latch. The markings on the back have a 2 a 30 and on the tip 32 and 23.

Please note M marking/logo on enclosed pic.

The metal one in one of the photos does not fit (the tab will not pop into the square window mortise). I originally had nylon ones and thought the metal one would not break. I ordered this metal one from you a couple years ago and just started using them when I exhausted my supply of nylon ones. T ... (cont.)

I am in need of a nylon slide bolt where the thickness is 1/4", notch on the end is 15/32", height not including tabs is 15/32", including tabs is 19/32", it is 4" in length.

We have screen windows with broken nylon slide bolts. Looking at your site it seems that a possible replacement is 91-054. please look at attached photos of latch in screen as some of latch separate. thanks. We will be ordering a quantity shortly. Harry A

Do you carry parts for the now defunct BF Rich double hung windows? I cannot see any numbers so do you need additional pictures with reference for scale. One photo is of a broken latch for the screen. The other is for the bottom of a double hung window that won't stay up..you can see the broken p ... (cont.)

So have you seen one of these critters? It is a storm window slide bolt/latch for about 30 years ago. If you can identify this and have two dozen of them...GREAT. If you can recommend a suitable sub, that would work too. Thanks.

I have attached photos of the bottom window frame with left side latch still in place. I have also attached photos of the right side latch and spring. The catch on the spring did break when removing. I think the parts should be 91-001P for latch and 91-003 for spring. I could not find any names ... (cont.)

Need these Crestmark window parts

You have to pull both side to pull up the window and keep it up. Any idea what's the name and where I can buy it tx

Here a pic of the latch that came on Storm window in a mobile home.

Please ID and let me know part#. Thanks. Dennis

Please see pictures of slide that locks windows in place.

Could you please identify the enclosed pictures of slide bolts we're looking for.