Viewing all customer Discussions for:

91-004 Corner Latch, LH

The narrow vertical part has snapped off. Its is stamped : 2810 A-S N Y C Do you have a replacement? Thank You!

Hello! Can you help with this? Body of the part is 9/16 or 10/16 inch wide and about 3/16 inch thick. Upward stem is 5/16 by 1/8 inch. The window is 20 years old, and I believe it was manufactured by a firm called Benning. Thanks! Peter

There is no information on the existing hardware.

Hi. Can you tell me when this door was made? See photo below. Thanks

Good afternoon, I have combination storm windows (approx.. 30 years old) that need new hardware, wondering if you can help me with selecting the correct hardware. Attached are pictures and also a pdf with dimensions of the frame and hardware. Thank you and look forward doing business with Swisco. A ... (cont.)

Hello, These are two fixtures for a corner latch and window corner piece for storm windows. I'm unable to find the exact models on your website inventory, but have attached some photos with exact measurements copied. Let me know if this is comprehensive enough! Thank you for your time in advance. ... (cont.)

Gents I am sending this image a second time to add more detail I think will be helpful. This sliding latch is for a triple track storm window. The width is5/8" and the length is 3-1/4". The right angle leg is 3/16" wide and 1/8" thick.The sliding bar has a nob or stop so it latches when in slides in ... (cont.)

I need the slide bolt and the corner, if possible. 7048 is stamped on a flat portion of the slide bolt. Thanks ahead of time, Pete

The frame broke, but unable to find parts. It is an old frame with no stickers or labels. The top side on opposite side has a felt strip. I am new to this type of frame repair. I am helping a friend.

I have a number of old storm windows on rental units in need of repair, I saw no markings on the storms or parts. Would prefer metal over the nylon replacement parts

I have a storm window with this style of slide bolt corners. Do you have a product that would work? I don't know the make of window.

It has PAT PENDING and a crown with six circles on it. I need a left and a right of this same type.

I am looking for replacement latches for my triple track storm windows

Unfortunately I dont see any type of serial # it was glass but i can replace or even with a net replacement either or

I am trying to repair an old aluminum frame double hung storm window. All corner parts are broken. The spring slide and corner clip was originally one piece. I do not see any numbers or other markings. I would be happy to send the actual parts. I would also like to replace the spline if you carry th ... (cont.)

Leg is 1/4" wide 1/8" thick

We need replacement parts for an aluminum "L" shaped pull/latch for sliding (up and down) storm/screen windows. I was unable to find any part no.s on the window or parts. I have included the front of the working replacement we had bought in the past:it has the fingertip pull. The back views have t ... (cont.)

This is the bottom, left and right hardware that is spring loaded an allows you to put the storm door window up and down. I hope that you have both the left and right pieces. Thank you!

I am in desperate need of corner keys. My aluminum frame windows are 1/2 inch thick and I think I am going to have to drill out the corner keys. I have attached pictures so I get the correct parts. Also, I need a few latches and I need to build 5 more windows. In addition I would like the fuzzy s ... (cont.)

I just tried reordering Corner Latch, RH 91-032 and Corner Latch, LH 91-031 and I am unable to order them. Your system can not seem to find the part. Have they been discontinued? If so, is there a replacement part for this that will still fit my storm windows? Thanks! Greg