Viewing all customer Discussions for:

91-140 Larson Slide Bolt Set

I need two of the catches that hold the window up, they have a spring behind them, and two of the corner pieces that hold the frame together. I ordered some parts that were completely wrong and I can't decide now what parts I need

I have a sliding storm door window with one intact corner. The broken slide bolts appear to be Larson, your PN 91-140, so I assume the intact tilt corner is also a Larson, your PN 95-190, although the offset of the tilt pin seems a bit different. Without disassembly, I can't be sure, but it appears ... (cont.)

The top fixed window has a broken latch on the left side.Bottom Removable window has a broken tilt corner on top left.

I need 2 of the latches and 2 of the corner connectors

Need slider bolt around 3 1/4 3/16 inches long half-inch wide for screen door window

I need to replace the corner sash for an aluminum storm door with a double hung window insert purchased from Home Depot several years ago. The glass pane frame is 28" square. The tip of the right sash is broken. Attached are photos of that broken piece in the frame and after I took it out of the fr ... (cont.)

Photo is of working right corner. Approx - 1" dimensions of latch needed for left corner are: 2.5" main part: then spring 1"; and then push/pull tab .025".

These 2 photos are the latches Left & Right side I need ,As you can see the tabs broke off for my Larson storm door window also I need the corners in case they break when I take it apart. Thank you.

Slide latches for a Larson storm door .

The pictures are self evident. But please let me know if you need more information. I am hoping that the manufacturer information will help identify the exact part needed to replace the broken latch on the upper right window. I would like to replace the part and I would appreciate a replacement vide ... (cont.)

Please let me know if you have this Spring latch for Larson storm door And if you have a video on how to replace it. Thank you

I'm not sure of the brand of the door. Was purchased at Home Depot or Lowes probably 15 years ago.

Need a corner part for window sash and the closet that keeps window up or slow and locks in

Good morning, My Larson Storm door REG# 022032U.241990729 has a broken slide bolt, on the right side, so the top storm window is difficult to raise or lower. I would like to replace both slide bolts on the storm window portion. I would also like to replace both left & right window corners as th ... (cont.)

Have a storm window (possibly Anderson) with a broken latch. Top item is the full unbroken part. Bottom pieces show the broken piece and the l-bracket (?) that goes with it. Thank you, Debbi

Need some help with with Identification on this part. I measured the part that is visible and the best guess it is about .75" tall - excluding the height of the portion hidden that pushes on the spring. So this one is really wide. It is about 3" excluding the locking tab. Any ideas what mi ... (cont.)

My Larsen storm door is 30 years old. We keep th screen in all the time so the slides and latches have becom corroded.. I need to replace all Key corners for screen and glass windows plus the slide latches for the glass. I don't have a serial number for the door but am sending a pic. Can you advi ... (cont.)

Hi there. I am looking for a few replacement parts for the item shown in the photograph. Can you help me?Regards,Richard

My slide bolt on both sides have broken off

looking for 2 pairs of left and right side sliding latches. Left has B-333-l on back side. what are your part numbers for these?