Viewing all customer Discussions for:

91-142 Slide Bolt Pair

Need two or something that can still slide, lock into side slot. This one is bent. Other broke off

Would you please be able to tell me if you sell a replacement for this latch? Thank you, much appreciated.

Locking piece for glass for door. One of them is broken as you can see in the picture. I need a replacement piece as soon as possible.

Hello, I am looking for a replacement latch to fit the subject Andersen/EMCO storm door (Serial No. 0019341314). I included a sample photo from your site (https://www.swisco.com/discussions/Emco-Anderson-Window-Screen-77-248556 - it looks exactly like mine). My RH latch broke in two. I see you ha ... (cont.)

No markings on the latch or storm window. I wish to find replacement latch as the window, and several others, have either broken springs or rusted springs. Therefore latches only close by manually pushing them closed. Note the spring is held in place with the indent that is circled. ... (cont.)

Hi There- I am rebuilding my old aluminum triple track windows. The extrusion is 0.33" thick and accepts 3/16" corners. I am looking for the slide bolt and believe your 91-023 (RH) and 91-022 (LH) could work. My old plastic ones are both the same length at 3.75" and other dimensions in your image ... (cont.)

Seeking R and L storm window latch. Marked as number 3272 and 3273. 3 7/16 long 5/8 in tall. Do you have a latch that will work?

So I am needing to get some of these latches. I have marked these RH & LH but they look identical and think they could mount on either side. I also want to get some springs which are about 1-1/4" long and about 1/8" OD round . These widows are mounted over the original wood windows. Hope you can he ... (cont.)

Dear Swisco, I need some parts to repair old storm windows. Image 8726 shows a right and left slide bolt to be replaced. If you have them I would like three right and three left. Measurements are: total length= 3 5/8 in; Body Height=3/4 in, Body depth thickness = 7/32, Nose length= 1 in, Nose Height ... (cont.)

I need to replace window latches and believe that your product 91-142 may be the correct part. I have been unable to determine how to remove the broken latch without damaging the frame. Would you confirm that 91-142 is the correct part and advise best way to remove old latches? Photos attached. ... (cont.)

I bought a few left (and right) hand latch - item # is 91-026 and 91-027 - from you. (left and above one on my pictures). Unfortunately, this has slightly bigger sliding head thickness (top portion on picture 8149) than my original one (right and below one on pictures. It lost its blade on this pict ... (cont.)

Hello, I am attempting to repair a storm window. I need two of the latch arms and two of these pivot pieces. The window in an aluminum frame Alenco window. The storm pane is the inner one. Any help would be greatly appreciated. Greg

I need 2 sets to repair 2 slide windows in a storm door. The number on the back of the latch or bolt is 4006102D and the other one is 4006103D.

i need this part it is a window finger latch and is die cast. my name is Al thanks

I am looking for this slide bolt that is a very odd style. I know y'all have one with a 1/2 inch tip on it but that won't work. Any clues?

House is 53 years old This looks like the one I need plus the springs. Can you tell if that's the one or is there a closer match The measurements are same as your catalog picture Is there anything else I need to do the repair? Also I need to replace a few screens if possible. Do yo know any sour ... (cont.)

Do you have any of these types of latches for a storm window

I need to replace several storm window latches in a house I recently bought. These are spring loaded, plastic, with an "ear" that sticks out so it can be grabbed and slid inward. The angled part(1/4" x 9/16" in the photo-latch 1) has broken off, on many of them. Please let me know if you have th ... (cont.)

windows from home build in 1993. this is the inside storm window latch that holds the window up. Thanks!

I am trying to find this part for my storm windows, is this item number 91-142 from your part catalog? The opening is 7/8 and I think the length would be about 4 inch.