Viewing all customer Discussions for:

95-020 Acorn Patio Screen Door Corner

1" wide and 2 1/2" long on the longer end 1" wide and 2" long on the shorter end not including the extra nub 3/8" thick all around I have no idea about the brand

My corner/roller assy is plastic with a 1 1/4 steel wheel. The door is a Screen Tight product. Do you have something that will work with this ?

Do you have 4 of these? also do you have secondary piece that holds the roller. In photo, it has the screws and I'm not sure if you have this part.

Hi My wheel came off my door but as you could see one of the photos it looks like the part that it attaches to, snapped and is in the latch

ItemReturning: Item 84-152 Item 59-054ReasonForReturning: Item 84-152 wheel was too small. There is no description on your site as to the width of the wheel. Everything else on the roller matched what we have. You should add the width of the wheel on your site. It doesn?t saddle 1/4? track. These ar ... (cont.)

The tabs that the wheel attaches onto are broken on both sides and I need the corner replacements with wheels. What do you recommend?

There is a black plastic insert inside that is broker .Can you provide me with both part numbers? And are parts available?

I cannot find any markings on the screen door or patio door frame. Can you help identify these parts and do you stock them? All four corners appear to be the same and screen door appears reversible. I need keeper for the latch as well but have reached the max photo upload limit and will have to su ... (cont.)

I need 2 corner 2 lower roller and 2 upper roller

Are you able to recommend replacements for this type of rollers and corners?

Sir/Ma'am, I am looking for a replacement roller for my 2014 Jeld Wen screen door. I noted on your site that you have several that look similar to the one I need by the roller dimensions are slightly different. Please let me know if this is something you can help me with. Thanks?.Don ... (cont.)

Replacement rollers left and right

Trying to replace my patio screen door rollers and have been unable to get the replacement rollers to "click" onto the attachment point in the bottom of screen door. After many attempts I noticed that the older roller unit that I'm trying to replace has a longer extension from the base of the roller ... (cont.)

I need help identifying these bottom rollers on a sliding screen door. I was unable to get any type of make or model off of the slider because the labels on it were completely faded out. Can you please let me know what you think and also any advice on how to remove/install them. Thanks ... (cont.)

We have an Atrium astm 2190 arg sliding patio door that the screen door glide broken off. Is there a way to fix this?

This picture is missing the plastic tab that is approximately 2 inches long and rises up along the outside off the screen door frame. It is held in place with a small screw.

I need to replace a proprietary Andersen corner key, which Andersen does not sell as a repair part. It appears that the Acorn 95-260 key will fit in the Andersen door frame, but does it have the small nubs needed to hang the Andersen roller as shown in the attached picture?

No markings of maker but came from Rivco, bracket 3/8" thick 1 3/8" wide, 3 3/8" tip to tip one way & 2 3/4" the other. Wheel assembly attaches to bracket through notch in frame.

Plastic corner piece inside the metal frame. Piece measures 3inx3inx1in and 5/16 thick.

One of the plastic notches that holds the bottom roller (wheel) in place is broken. The other roller does not attach to the notch properly. Not sure if there's a way to replace just the wheel assembly or if the entire screen door needs to go, unless you can provide a way to reinstall the plastic ass ... (cont.)