Viewing all customer Discussions for:

95-020 Acorn Patio Screen Door Corner

Replacement patio screen door rollers seem to have very weak pivot point clamps. Do yours actually stay in place?

I have received the parts and am trying to install them. I have the corner brackets in place, but when I try to install the wheels, the only thing that happens is that the wheelt pop out of the roller body. I am ding exactly as the video shows so I am not sure if I have received a bad lot of wheels ... (cont.)

Greetings: I have attached a photo of the patio door corner key. I need four of them if you have them or if you know who the manufacturer is that would help too! Thanks in advance for your help with this.

don't know roller size 1&1/8 x 13/32

Hello As far as the corners and rollers go, I will presume is part numbers 95-020 and 84-016. They are already in my shopping cart. Please tell me if I am incorrect. The problem that I am not sure about is the door handle. The very nature of this design of the original handle is bad ... (cont.)

I need 4 of these. please provide feedback if you have them available one has the number stamped into it 24 the other 21 ,the other 18 and the other 17 steve

I need 4 patio screen door rollers included you will find an attachment with measurements if you have any questions please contact me I hope that we will be able to find the ones we need. my name is Alfred my telephone number is 219-487-9688. Thank you.

Have you ever seen this type of patio screen door roller? It looks like it attaches to the corner connector but it is different from the one in your video for the 95-020. The roller opening is 3.5 inches from the edge of the screen door. On the top one the wheel only came off easily. Visually the bo ... (cont.)

I am from Panama, And I am distributor part for Windows to Central America and Caribbeans island from USA(Quanex IG), Spain(hardware for Windows and Doors), I have a Customer need some items to screens patio doors from Quanex.. We are looking for Accesories for the below drawing...... If you have t ... (cont.)

The wheel diameter is 1-1/4" wheel thickness is 5/16" overall length is 2-7/16" spring length is about 2" I have twelve screen doors that I want to re-wheel Thanks!

I dont know the brand of my sliding screen door but mine had these plastic corner inserts. Theyre 1-1/8 just like the 95-020 Acorn, but my piece appears to be just about a hair above 3/8 wide. Wondering would these fit my screen door because i cant find these plastic corners anywhere? The hole for t ... (cont.)

The door rollers look like your 84-091. The attachments to the corner assembly have broken.

I need help identifying this corner bracket. any suggestions or help would be great. Also do you have .230 foam spline in rolls of 100 feet? All I see is 25 feet. Thank you kyle

I need new screen door tension spring/roller units for a sliding door. I assume it is a Certaintee door unit because the house has Certaintee 400 series windows throughout. The sliding screen door has a very thin tension spring/roller unit that I have not been able to find locally, even at a large ... (cont.)

Attached is a photo of the rigid black plastic corner piece for which I am searching. The product tag in the photo comes from a different size Milgard screen door - slightly wider and shorter but same purchase date - hope it is helpful anyway. Someone inadvertently kicked the screen slider corner ... (cont.)

Hi, the pictures are for the rollers on my SGD screen door- they have broken (the attachment posts on the adjusting block broke)- I am looking for a much sturdier roller that I could use for this door - the door opening for the roller is 3"x3/8". Also, my door has two rollers on both top and bott ... (cont.)

::::: 1200 series Dorwal model Acorn system ::::: I do not see that you offer a roller sub-assembly for the 95-020 corner, however, could you recommend a replacement full assembly?

Similar to item #84-101; except one difference: Instead of being a complete circle to use a nut; the one I am looking for is a 75-80% circle; with the opening that faces the white roller. The reason: there is no nut used to assemble my door; the roller needs to catch around a metal piece insi ... (cont.)

Replacing sliding screen door rollers lp with installing sliding screen door roller: 1-1/4 " (SS Housing Code 84-101). Do the exsisting corners need to be also replaced?? I need to replace . My door has SS Housing Code: 84-101. Do I need to also replace the Corners? AJ

need two new corners for sliding screen door just bought 2 new rollers through you item #84-101