Viewing all customer Discussions for:

95-029 Tilt Corner Key

This is attached to the top of an aluminum storm window. It allows the bottom of the window to pivot and slide down a channel to a spot where it can be removed from the channel or track. The storms contain 3 panels (1 screen and 2 glass) this part is on a glass panel. The window is labeled ALLIED ... (cont.)

Replace broken metal cllps to storm window on storm door with one i brought from your company. Need to replace plastic unknown items pictured above. They were removed from trim section at top of window. Those are photos showing the top with looks like im missing screws to secure frame on the inside ... (cont.)

this piece is located in the upper right and left corners of the removal storm window. Appears to be plastic or nylon. piece is held in place with a Phillips self threading counter sunk Metal screw at each corner. Purpose is to hold the top of the window in place when raised and lowered. Also help ... (cont.)

The peg is broken off the pictured part. The part is taped together to show measurements. The same part on the other side of the window is also broken. The short leg of the "M" shape hooks over the flange below (in photo, to the left of) the screw hole when the part is screwed into the frame. Do ... (cont.)

I have several window guides broken. Is this the same thing that I need to replace?

Hello Looking for tilt key like this in black. Thanks,

Circa 1984 storm windows no markings to provide. The smooth metal pin is a cheap fix of years ago which is a nail. A plastic/nylon pivot should be where the nail is. The screw goes into a smaller channel shown in top view which holds corner together. The frame channel seems to be 7/32 inch. ... (cont.)

I am trying to locate a replacement pivot for a residential storm window. It is for the opposite end from the one pictured so the pin would face opposite direction. I do not have a manufacture name. I could not get your part

I see you have spring, do you have Swivel pins

Hi, the plastic pieces holding the tops of the storm windows in place are mostly all busted, so the storms 'slip' down. The windows themselves are TwinPane1982A. The storms don't have any markings on them, but they are from the same time period. It seems like a simple enough plastic piece, with a si ... (cont.)

I am in search of tilt key replacement plastic tilt keys for my Storm windows

This is from the corner of a storm window. The guide pin broke off and I need a replacement. What is this piece called? Where do I get a new one?

I need help finding the part for the storm glass that holds it in the track. Its awhite plastic piece that the top part snapped off. In the 1st photo is the part thats unbroken & still in the window frame-in 2nd is broken one in window. I seems to e screwed into the middle of the plastic piece. I ... (cont.)

Can you please help identify the correct part number for these?