Viewing all customer Discussions for:

95-205 Square Cut Corner

Picture 172059 is one of the top corner pieces that hold the screen in the window and also form the frame. Pictures 171950 and 171804 are one of the bottom pieces that form the frame this one piece showing both sides. All of these corner pieces fit into metal frame pieces that are around one half in ... (cont.)

Tried to put new screen in my frames and moat of the corner pieces broke due to what appears to be UV damage. The frame measures 3/8" thick. The squares at each corner measure 13/16" without the part that goes inside the frame. The lower corners have pull tabs and the uppers have a piece that sticks ... (cont.)

two different types of corners the top corner has a tab that fits into the window track and the bottom is a plain corner

Does the 95-205 match up with the 95-206?

Can you identify this corner as being something you have in stock? big square is 1 1/16" , legs are 5/8" wide and a heavy 1/4" thick ,not quite 5/16" and 2 1/4 " long long not counting the thin square .The writing on the piece is ASM and the number 4.

Good morningWe are looking for the screen corners for our windows. We are not sure of the manufacturer but have attached a picture of the sticker found in a window. The top corners have a molded nub like ramp and are marked right and left to retain the tops of the screens. The bottom corners have th ... (cont.)

we have several hundred window screens that use these corners.the tops have a hook that holds the screen in the frame so i would need a left and right,the bottom ones do not.there is a flat edge around the outside of the center piece that has broken off of the one in the photo.THE CENTER PIECE IS 7/ ... (cont.)

To Whom it may concern, I would like to know if Swisco carries the parts shown in the photos. One of the keepers interlock into the edge of the window frame and the other one is with no lip being squared off. The rough opening of the screen frame is also shown. Thank you in advance for your tim ... (cont.)

Screen corner from superseal windows from approx 19 yrs ago. Looks like one leg says Bayform and other has DP307078 and RD63647

Greetings - I believe this is a milgard window but I've been having trouble finding the corner of the screen with the little retainer clip as pictured. The screen is located on the inside of the window so needs the integrated clip. It's a Bayform corner.Thanks.

Looking for replacement corners. Originals damaged over time. Thank You

I need to replace numerous corner keys for screens used in window manufactured by Keystone Bldg Products that might be 15 to 20 years old. The bottom keys have what I would describe as handle to pull the screen in and the top (pictured) have a notch to hold it in. I could do without either of thos ... (cont.)

The screens have two different type corners. Upper corners have tab that goes inside the window frame. The first pic is a lower screen corner. The second pic is a lower corner i had to destroy to remove. The flange of the corner is broken offThe third pic is info that are on my windows.The fourth ... (cont.)

I bought your part numbers 95-206 and 95-205. They fit nicely into my screens but when you put the screen completely together it is smaller than the original size. As you can see from the attached picture, the block where the screen rails come together is a little smaller than your part. Do you ha ... (cont.)

Dear expert, I am trying to find the screen frame corner to replace the broken one shown in IMG_3410.jpg and IMG_3409.jpg The side of the frame is shown in IMG_3408.jpg and its dimension is shown in IMG_3411.jpg The frame corner size is 13/16 square. I know the standard size should be 3/4, but some ... (cont.)

I am technologically challenged (I'm old). I needed help to get the pictures from my phone onto your email. Aside from saying "PGT" there is no other reference number or name. The screens were manufactured around 1960, which makes them younger than I!Thank you for your help.

This has a depth of 5/16" and is 5/8" wide Please let us know what you have for a replacement part to match this. Thanks

We need the 95-206. The screens that we do only use that type on the top and we use the ones in the photo on the bottom. Is there a special corner that is used? I need the corners like the picture that I sent you. The one that was removed from the customers frame. 95-205 looks as though it has ... (cont.)

WE NEED THE BOTTOM FLANGE CORNER THAT WILL GO WITH 95-206 in bronze

Good morning, I have the same corners referenced above and believe either the 95-205 or 95-206 could work as replacements. Do either of them come in almond?