Viewing all customer Discussions for:

95-205 Square Cut Corner

I have received 24 of 95-246 window screen replacement corners for PGT screens, however they do not fit. Can you match one with mines that are attached in the images above.

My screen corners are plastic and deteriorating. I bought the replacement parts from you, but wonder what is the best way to replace the damaged corners. 95-205 is the part number. How do you pull the old ones out? It's basically a fixed corner, with no way to pull out one side. Do I need to fu ... (cont.)

I see you have several types of corner pieces with the "feathered" edge. I don't see any marking on the frame itself. In the photo, I forgot to include the thickness of the part that's inserted into the frame. It's just over 5/16".Thanks.Tom

Looking for a screen corner with flange and the tan that holds the screen frame is is spring loaded as opposed to the common fixed one. See photos.

The attached photo shows what I ordered incorrectly (red X over the item). The other side shows what I really wanted. My bad.

I need to replace these plastic corner pieces for the screen frames. I need 24 of them. They are all dried out and broken.

Thanks

I need 128 of a corner that works with the dimensions in the attached pictures. I purchased the 95-206, but it was too wide to fit into the frame channel.

Hello I'm looking for a replacement piece for the corners of the screens. The plastic is so brittle that it snaps off. Need to replace around 15 windows. Any suggestions would be appreciated. Thanks

I originally ordered some corners from you and did not realize there is an offset. After playing with your website I noticed this nice place where I can send you pictures. Please see attached and see if you have them. Thanks.

?Hi, this is a picture of my broken corner. As you can see the other 3/8" flange is broken off. This is for my screens. I could use about a hundred of them. I hope this is enough to allow you to know what matches up my part that you have. When I looked, it looked like your part number sch 290wh or 3 ... (cont.)

The original company (National Window) is out of business and looking for a replacement piece for the corners of the screens. The far right pic is a good piece, however when you pull on the corners to remove the screen, the plastic is so brittle that it snaps off. Need to replace around 10 windows. ... (cont.)

I found replacement parts on your website, but I am not sure they will fit. Do you sell different sizes? I attached photos. Thank you.

No names on parts. Need enough for four screens.

I believe the channels are about 5/8"x 5/16". the full corners are about 1 and 1/8" . You can see the the corner edge of each of these are broken. Looking for the correct replacements. Thanks

Looking for some replacement Corners fore my Screens

I can't seem to find the replacements for these corner pieces. I have found similar but they seem to have the flange on the wrong side. Not sure if you stock the top parts as well. Thank you for any and all help you can render. Tom

I need six of each corner. These are Thermolock screens which is now Vinylmax. The size of the tubing that the corner piece slides into is approximately .335 wide and.405 high, the tubing thickness is approx .045 thick the corner square is approx 1.010 square. Thank you for all your support Pl ... (cont.)

I need a bunch of these corners and Rivco is out of business

Any Advice appreciated