Viewing all customer Discussions for:

21-001 Bi-fold Door Pivot Assembly

I have an old Strato-fold door. It is a single bi-fold door measuring 36 x 96. Serial # 16808. I need the full set up of hanging hardware. Some of the parts are missing so it's hard to determine exactly what I need from your site. In looking at the schematic on the back side of the door, I ... (cont.)

We are looking for the hardware to put this closet door back together including the tracks.

Is your 21-022 bi fold door guide pin also for bottom applications? Your description calls it a top pin, but it looks and measures identical to the pins on the bottom of my door. Also, do you have the aluminum track that this pin rolls in. Thanks.

Need to know what is the piece that keeps the bifold doors closed, it is where on the top rail the doors meet when in closed position. Also the door the customer purchased at a retore had no hardwares and the top opening of the closet is 81" the mirrored doors are 78" tall. Do I need to lower the to ... (cont.)

Hello! I need to replace the tracks for my bi-fold closet door. I would like to know if these tracks have pivot brackets on both ends (the picture is showing only one end). Thank you.

I need 4 of each of the picture that was sent and also 2 pivot brackets part #21-200 & 2 bumper #21-277

Hi, I have 2 closet doors with 60 inch openings. The inside spring pin for the top doesn't move,it should be "springy" right? I am guessing that I would need 4 tracks, 2 top, & two bottoms? and four corner brackets and 4 springy pivots. The stationary pivot guides seem to be in good shape, and t ... (cont.)

The mechanism that holds the bi-fold metal door in place in the top track is broken. Inside the door is a label that says: Evans Products Company Door Systems Division Roseville, Michigan 48066 Model "E" Door - Oct. 25, 1976 The metal unit that keeps the door in place will not tighten/secure wit ... (cont.)

Dear Customer Service, I am doing a renovation and do not want to change the metal bifold doors. I am trying to identify the correct replacement parts for National doors, and would like to purchase a complete set (including channel, if available)for each door. I have attached a picture of the ... (cont.)

I have a project that has 700 units about 2800 bifold openings that will need new hardware over the next 2 years. Do you have the attached type hardware?

Hello: I recently purchased a home with 10 of these bifold doors. All of them were jury-rigged in some way or another, so I have no idea what the original hardware is. I would like to replace the current hardware with the appropriate original hardware to maximize the functionality of the doors. Eac ... (cont.)

I have three sets of doors by US plywood. The pins are 5/16 by 51/4 long. The top pivot pin looks like the Fenestra pin and spring. the bottom slide pin is threaded at the bottom of the pin with the nylon peice measureshole size is 3/16, the ring is 5/8, and the end is 3/8. I am not finding the repl ... (cont.)

I have hardware missing from several metal bifold doors. I have identified the door pivots as 21-005, and the cone springs as 21-256. But can not find the pivot rod clamp (picture attached) and the plastic door pin caps (same as come with the 21-005 door pivot). I have found a label that indica ... (cont.)

Does the 21-001 rod end have a philips head adjustment?