Viewing all customer Discussions for:

21-001 Bi-fold Door Pivot Assembly

I need the bottom track for a 2ft wide door and the bottom pins.

Need pivot clamps to replace broken ones. Also need pivot pin springs like the one shown in the photo. Can you please provide part numbers?

Please let me know which patr number is match to in my picture 1 part i found in your part picture your part number is 21-007 match with my part onather 2 part please let me know your part number This is three pieces 1. Top 2. botam. & in middle part is base sockets.

I need tracks for 102" opening and two 60" openings.

I need replacement pins, which part would I need? The pins it has now are 5 1/4 in long and 5/16 in diameter. Also if I decided I wanted to replace the tracks which type would I need for the top and bottom?

I'm looking for hardware for old metal bifold doors.

Hi am having trouble finding the hardware and track for my old metal bi fold doors. Do you have hardware kits available? I still have to top track but I'm missing the lower.

i have leigh metal bi fold doors from around 1970, the pivot rods are 5/16 dia, the guide pins are 1/4 dia, i think i need, 2 #21-001, 2 #21-154, and 6 #21-007, if this is correct can you tell me the cost with post & packing & tax. thank you

Hi there. We have these beautiful, original metal bi-fold doors that were an issue since we bought our house 5 years ago and I have been trying so hard to find updated hardware so that they not only look sharp but function. From watching your videos online I'm almost positive that I need your 21-007 ... (cont.)

Customer needs metal bifold doors rebuilt to close properly

Need 12 pin caps for all the bifold doors in the house

I'm looking for a bottom track for a bifold metal mirrored closet door. I recently got the guide pin 21-007. This is the track that goes into. The pin fits the door perfect but it rubs on the sides of track. Thank you.

Looking for parts for 80s slimfold doors please help... bottom track pins etc Here are some more pictures of what I need. Thanks

I have metal bifold door and replaced hardware using 21-001, 21-007 and 21-154 (see order 1952171). I just removed door and refinnished the hardwood floor. I do no wish to reinstall the rail and inlcuded pivot bracket; I wish to keep floor unobstructed so that I can slide and/or wheel things in/ou ... (cont.)

My name is Roy, I have 12 old metal bifold doors that needs new guide pins, springs on the top and bottom. Here is the door that I need part for please lmk thank you These doors are about 50 years old and all needing replacement. Thank You Roy

Looking for a aluminum bifold door track with the following specs length :36" with: 1" depth: 1/2"

here is my problem. i have 40 year old metal bi-fold doors in all the closets. they are bolted together so they swing open like a regular door, so i don't use the pins on the mating edge of the doors, only the outside edge. on one door only, i can use the slot on the bottom pin and raise the door ... (cont.)

Hi I'm working in an old house with bifold metal doors in a closet. Owner doesn't want to replace doors just repair. The label on the door says Evans products company but I can't find any info on the internet about the doors or company. would you be able to help me match the part I need. only one se ... (cont.)

Please contact me regarding replacement parts

Hi, I have a Model "D" bifold door with glass. One of the bottom pivot broke and I need a new one. See attached photo. Would you be able to point me to the right part? Thanks. Thanks for your help. I attached some pictures of the bottom pivot that broke and didn't slide well on the bottom t ... (cont.)