Viewing all customer Discussions for:

21-001 Bi-fold Door Pivot Assembly

5/8" pincap diameter

Looking for replacement part for lower pin on older metal Slimfold mirrored bifold door. I think the door model number is 25273062 (picture is attached) The existing pin that is bent is 6 1/2" long as show in the attached picture(pictured next to tape measure). I tried getting the one in the box tha ... (cont.)

The doors measure 35-1/2"W X 93-1/2"T each. There are 2 doors.The pin diameter is.317" diameter.I need all the hardware for all 4 corners of the doors.Some of the bolts seam large and may have been added by previous owner.The top and bottom tracks are fine.Feel free to call.Pat

Hello, I am looking to replace the tracks (currently they are the same profile top and bottom) with a new low profile top track and floor pivot without the track. I am looking for the top track to be a silver or white finish. Do you have a kit or list of parts that would appear to work? The opening ... (cont.)

Hardware for my bifold doors Not sure if I need anything else or do I just put these in place?

Hello, I would like to replace these pins on this closet. I want to make sure I am getting the right ones. I have watched the video. Could you please confirm for me the right pins. I need the pin at the bottom for sure. The top pins seem to be fine but would like to purchase backups. Thank you Ang ... (cont.)

I Need another metal post and the plactic tips. I just do not know what size will replace it. I also need 2 new spring post to click them into the top. This is for an 66 years old garage furnace closet. The doors are nolonger bifold, they where fused together so they only swing out pivot like a ... (cont.)

need help identifying this part

I need 2 of these for the top of this door and one for the bottomI don't know what these are called.Al

I'm looking for track and the name of the part the bifold door pin sits in. The female portion that sits in the track.

I own several condos in a condo complex that all have metal bi-fold closet doors. Many of the guide rods are missing at the top and bottom. I'd like to replace all the ones that are missing and purchase a few more to keep if anymore should go missing. I'm not sure which rods for either the top or bo ... (cont.)

I just bought a house and all the bi-fold closet doors have these clips holding the pins in place. I found part # 21-154 and they look like they would work. Do you think they will?

Hello, The house was built in 1963 and still has alot of these original, metal, bi-fold doors. Some of these pins are damaged and need to be replaced. All 3 are about 5 3/16" inches long and 1/4" thickThanks,Robert

Looking for 3/8 ID nylon bushings for 3/8 OD pins for top of door to guide door in track

Hello, I am looking for replacement parts for closet doors which I had to remove for a construction project. I would prefer if there is an easier pin to use than the ones I have in the pictures. Also there is a stopping block in the bottom rail that is missing and I would like to replace it and th ... (cont.)

Hello Do you have replacement hardware for this bifold door? It's super old, date on back says 1971. Neither door set had a complete set of hardware on it. They're in an old mobile home. Hoping you could help with the upper and lower pin replacements. Also not sure the tracks have the pieces they'r ... (cont.)

I am trying to replace the broken pieces for a 90 inch metal bifolding door. Can you give me some advice as to what replacement parts I need to purchase?

I need replacement floor tracks for my 1969 fold away bifold metal closet doors - still available? Do you sell a kit to refurbish the door and all the hardware?

I have two 1994 metal closet doors Slimfold E that need new hardware and one upper track. Please help me order the parts. Julie

One of our doors needs the plastic/ neoprene pin covers. The doors were installed in our house when it was built in the early 1970's. I've attached a picture of a sticker found on the inside of one of the doors. This is the only identifying information on the doors. Do you sell replacement plast ... (cont.)