Viewing all customer Discussions for:

21-002 Bifold Door Pivot Pin, Benchmark

Have these old metal bifold doors. I need help obtaining top and bottom pivots if such a thing.looked at YouTube video but as you can see the doors are a little different. Need parts. Thank you Brad

Is there a substitute for 21-001? Mary

These pins need to be replaced. Do you have them?

We are looking for parts to secure bifold steel closet door by Benchmark. Most likely need to replace missing spring and cap to fit the track. The pins are about 5 1/2 inches or 14 cm long (a quarter inch or 6mm in diameter). Another spring was 2 3/8 inches or 6 cm long (1 cm diameter). The track ... (cont.)

The doors are fine I need all other operational parts to glide doors open and stay in the tracking top and bottom.Price and availability please. for Model number AAAJFG .Pins, springs, keepers,guides, bumpers etc.

do you sell replacement tracks for the Benchmark brand of Bi-Fold Steel Doors? They use the Product Code: 21-044 style pin. In addition to the track, I also need the plastic pin grommet/guide which snaps into the door and the pin goes through. I have multiple sizes of the door, this particular on ... (cont.)

Hello customer care. I am Doug Woods at 919-309-5563. I have six bifold doors that need a new threaded rod installed at the leading edge of the door. Please refer to the photograph within the attachment and get back to me if you have a part that would work for this. Thank you very much. Doug Woods ... (cont.)

Good morning I need new tracks for bifold doors from the 1970s. the opening is 48 inches. I need the upper and lower track. I hope the pictures help.

How much vertical adjustment is there in this part. I have new carpets and need to raise doors at least 1/2 to 1 inch. I want to get new springs and clips, can this be done? Thanks.Paul

We are in need of replacement pieces to match those shown in the attached photos. We are working on a house built in 1981 and are in need of eight of each of the two parts shown in the attached photos with all of the components (springs, rods, clips, screws, etc.) to reinstall the original closet d ... (cont.)

I am looking for a replacement track for some benchmark steel doors but my openings are 2 feet each. Can i get a 4 foot track and cut it down? I didn't see a 2 foot options for steel doors. Thanks!!

Bi folding metal closet door pins - about 6" long and 1/4 in dis. Missing 2 top pins in these metal closet doors.

Please help identify hardware.Not sure if this is original hardware or not. Need enough hardware to completely re-do two bi-fold doors. Long pieces measure 12

Hi I have a 3ft metal bifold door and would like to replace the top and bottom track and 4 pins. Based on the attache photos what would you recommend Thanks

I ordered 21-402 & 21-150 & 21-108 for a mirrored bifold closet doors. 21-108 does not fit in the track I ordered i talked to one of your reps and they said i need new pins and caps to fit the track she asked me to send pics of the old pins they. can you let me know what all i need to order to fit t ... (cont.)

My door is a Leigh Products. I need a track for folding door 24". My actually track has 1"3/16 width, 1" height

I have a client who has 4 96" steel bifold closet doors, 41 years old in good condition, but missing all the hardware except for floor brackets and 2 original top tracks, I was wondering if you can tell me if you have the 8 top pins, springs and hardware( 4 pivoting, 4 guiding brackets) and the 4 bo ... (cont.)

I'm trying to repair 2 Benchmark steel bi-fold doors. One is 3 ft wide by 8 ft tall; the other is 2 ft wide x 8 ft tall. The top pin on the 3 ft door needs replacing (on the leading edge) and the top and bottom pin on the 2 ft door needs replacing (on the leading edge).

You have item 21-002, Benchmark bi-fold door pivot pin, where the plastic tip has a 3/8" diameter. I do not need the pivot pin, but I want to purchase new track that fits this pivot pin. It looks like 21-401 could work, but it does not show the width of the track groove. Do you have more ... (cont.)

I need four outside pivot rods with spring I believe . The inside pivots are in good condition..this is 2 -36" bifolds ... Can u find the correct outside pivots for these doors, they are missing, thank u