Viewing all customer Discussions for:

21-002 Bifold Door Pivot Pin, Benchmark

I have two sets of US Plywood branded Metal Folding Doors. Both are obviously reasonably old. The metal and plastic fittings are worn or missing and I would like to buy 4 complete sets of parts, one for each corner, including the 4 moving metal sliders, which sit inside the channel rails, into which ... (cont.)

Hello, I have a Benchmark metal bifold door from probably the late 1970s. All the pins (three ones most like your 21-044 and one like your 21-002) seem to be intact but I do not have any of the tracks or brackets required. I have never hung a metal bifold before so I am not entirely sure how they wo ... (cont.)

This is a picture of the top track for metal bi-fold doors. I have a 48 inch opening.

These doors are in great condition but the track and pins seems to be on its last leg. The doors squeak horribly and keep coming off the track. Can you assist me in what parts I need to fix the door in perfect working condition again. Thank you. I have included pictures. The doorway for the doors is ... (cont.)

Below is the picture of the metal door I have. It did not have any pins on it. I purchased pins that move (114) in Home Depot for the top and bottom . I don't know what pin to use for the stationary pin on the bottom. The door is touching the floor and needs to be raised up. I saw your Bi-fold ... (cont.)

Good Morning; A few months ago (August 24, 2015, Order 673586) I ordered some components e.g. Pivot pin 21-044 for Benchmark metal bifold doors. The component are fine and I am planning to order more. I have these doors all over my house here in Maryland. One question I do have is I notice whe ... (cont.)

I need a replacement part for benchmark bifold steel doors. Pictures show one part intact on one door, but the same part is missing for the other door. Please let me know if you can help me. Thank you.

We are looking for a replacement part for a BenchMark Bifold closet door bottom track. Here is a picture of the track itself along with the pin.

i have a set of Benchmark Bi-Fold doors in my pantry. i just had them painted and replaced all the hardware 21-044 and 21-002. the doors open and close now very smoothly however the right side wond clsoe completely ? i have tried several adjustments and there is a slight gap between the doors so t ... (cont.)

Hi this track uses all the parts i already ordered but it is pretty beat up. can you identify this track for replacement / It uses pin cap 21-108

I havre a set of bifold mirrored doors, with what appears to be 21-058 as the top guides ( only they are 4 1/4" long= complete with spring clip and guide. However the bottom guide ( not the pivot) seems to be 21-049 - ie no spring and that little nylon guide - actually two of them and it i ... (cont.)

What would be the replacement part for this door pin for a Benchmark bifiold closet door? It is about 27 years old. Thanks

hii I have this closet door I need to buy replacement parts for it I about two feet wide metal and the bottom only has one circle thing at bottom and top I think you are calling it the pivot bracket. Should there only be one per rail ? Is it cheaper to buy these parts in a set or individual , also d ... (cont.)

Well, I finally received pictures of the door to give you an idea of what I need to make repairs. So, this is the bottom of the door(I think) which has the hardware still intact but I need the hardware, the pivot pin/screw and track pin/screw for the top. I'm not sure what the actual names are but t ... (cont.)

we are rehanging a metal bifold door and the bracket that mounts to the floor rusted away and we need a replacement part. Looking at the parts on the site I don't believe it is shown. It is the pivot bracket into the floor. I would need the screws as well

We are having a very hard time finding the correct part for our closet door. Can you please help

I am looking for a type of aluminium track for metal bi-folding closet doors. Can I send a photo of a sample to this email for one of your expert parts people to look at?

I need to replace the track to my closet door. Attached are photos of the track that needs replacing along with the pins. The pins seem in good condition but the caps need replacing and maybe the springs. Can you please recommend replacements for these parts? Thank you.

I have older Benchmark doors and I need a couple of the sliding bottom rail pivot bracket. The part that the bifold pivot pin goes into. There is one on the top rail that has a place to screw into so the bracket can be used as a non-moving hinge bracket.Not sure if the same bracket is used as a slid ... (cont.)

I have several metal bifold closet doors in my apt but all of those hardware are old and not functional. Is it a good idea to just use the whole new set of pivots and guide pins like your video showed, instead to find the match because some are lost and hard to match? Which group are the best ... (cont.)