Viewing all customer Discussions for:

10-313 Swinging Shower Door Bottom Sweep, 36"

Hi, looking for some help to replace this brush style shower door sweep with just a plastic type sweep; the brush stays too wet and is causing mold and caulk to never get to dry in between shower uses. This brush style is 26 inches long and has a more round vs rectangle top that needs to fit into th ... (cont.)

Hello! I cannot find this same "double arrow" shaped bottom seal replacement. Do you know where to find it or what other shape would work? It slides into my door and is 1/2" tall and about 1/8" wide at the top. Thanks!

Hello. My daughter provided me this part and asked if I could help repair it. I am not sure if I need a half round or tee shaped replacement seal? The tee slot is more like 7/32. The Home Depot 5/32 tee is too small. The seal length is 29 inches. The original seal was clear. Thoughts? ... (cont.)

it is screwed under bottom door with 3 screws and with seal,seal metal 21,1/2 in.seal

What you ship Item 10-313 Swinging shower door bottom sweep 36"is wrong here are pic 5/32"7/32" to wide.

length is 15/32 " width of the T or star to fit in the slot is 3/32" ...

Looking to replace bottom rubber seal on shower door. Bought 5/32 in. Tee style and it is too big.(see below). Mine is this style but much smaller (See picture below).

Looking for shower door gasket for Aqua glass brand shower. Gasket is 21.5 in long and slides into a channel on a metal bracket that attaches to bottom of door with 3 screws

Please let me know if you sell a door sweep that is 7/16" thick and will insert into my existing fixed frame door. Thanks!

This gasket sweep slides into a t shaped channel but I cannot find the right size anywhere. The door is 24" and from the early 1980s. Advise? Thanks.

Hello, I am looking for a replacement shower door seal, it seems to be a smaller version of a shower door seal. Can you help me with this? Thanks!

Hello my name is Chad, to whom it may concern, I have a shower door sweep , the dimensions are 1/8 inch by 3/4 inch by 25 1/2 inch. On your site there is a gray colored sweep product code 10-313, but I need one in black and was wondering if you carry a sweep in black? Thank you for you time and l ... (cont.)

I'm trying to find a shower sweep. 19 in x 3/4 in grey sweep with a hook slide. Do you have anything That might work.

NEED TO REPLACE SHOWER DOOR BOTTOM RUBBER: 28.5 INCH LONG 3/8 INCH HEIGHT 3cm wide (opening groove do you have? local plumbing store supply the opening groove too wide to slide

trying to find a replacement. 3/4"

Where can I find a replacement? I submitted a few minutes ago and received ID # d164132 but I had an incorrect e-mail address on the request.

I need to find this door sweep for my Shower door. The t bar slides into a track on the bottom side of the door and then goes shut to keep water from splashing out the bottom of the glass framed door. I bought like 6 ft of it in the past but can't remember where I got it from. Please let me know i ... (cont.)

Hello, I'm trying to find a plastic replacement seal for my shower door jamb. Attache please see a picture of the groove the seal is threaded into.

Hello, I need a replacement sweep/seal strip to fit a shower door. The strip I removed is similar yet slightly smaller than the product I've seen on your site. The stirp I removed is approximately 1/8" wide by 3/4" tall and 28" long. I'm hoping you have a matching or alternative product to recomme ... (cont.)

Hello. I'm looking for the seal pictured here. It slides into the groove for the shower door. The "t" part is 1/8" and the fin is about 3/8". Approximate length is 6 ft. I appreciate whatever help you can give me.