Viewing all customer Discussions for:

21-200 Pivot bracket

I NEED THE ITEMS NECESSARY FOR THE BOTTOM TRAVEL OF THE DOORS ACROSS THE FLOOR.

I rehabbed some 50's metal bifold doors and either was missing one of these or i have lost it. Can you direct me or tell me what i need to measure to get correct part. Thanks

Hello, I have Slimfold Bi-Fold Doors that came with the house when it was built in 1988. The metal pin that I have has what looks to be threads at the bottom of the pin. I need to replace the top cap that fits on the metal pin that broke yesterday and runs along the track when you open and clos ... (cont.)

missing or broken hardware from a set of louvered metal bifold doors

Will 21-204 pivot brackets work with 21-404 tracks?

discussions/Bi-fold-mirror-door-77-47053 Can you identify the door? It's a 60" MIRROR bifold 2/ sections of 15" x 15". The track in the floor is the same as the extra parts I received. I need?: 2 top Bifold Door Mounts? 2 top Bifold Pivit Pin 21-0007 2 bottom Bifold Door Bottom Bracket ... (cont.)

I have a set of metal bifold doors. The photo of the complete assembly shows a white plastic item that rides along the track. Unfortunately, one of the caps broke and now the door does not close properly. Any chance you are able to offer a replacement part? Thank you.

Need hardware for older weldwood metal doors made by us plywood see pics Thank you..

Hello, Based on posting/pictures already on your site I have identified the bifold doors in my house as old style Slimfold. But I had some questions about the parts I need. Want to replace all the pins and brackets. Are the pins and brackets on the top same as bottom ? That is the pivot pins, guid ... (cont.)

Attached are photos of the top of the metal bi-fold pivot. I also needs some of the threaded parts for the bottom pivot. At minimum, I need (4) springs, caps, and the best device to hold in the pin. The pin is 5/16 (.310) x 5 1/4" long. I was looking at parts 21-065, 21-001, 21-007, and 21-154? ... (cont.)

We purchased our home in 1972. Three of the four bedrooms still have the slides for the doors which were taken down when the various parts failed over the years. The doors are still in good condition, but most of the various parts need replacement. And, I can find no instruction sheet ... (cont.)

Our closet doors have a label "U.S. plywood " and another label "U.S. metal doors. The pivot in one does not hold the door any more. Can we get that part and the pins that go into it. Kevin

Hi, I need this part which should match up with Product Code: 21-065. Please let me know if you can find this part. Thanks! Travis

I need lower guide pin parts that is shown in the attached photos. The label on the door says it is model "D" door with date of year 1973. The door is a metal bifold 7.5 feet high.

I need 4 of each of the picture that was sent and also 2 pivot brackets part #21-200 & 2 bumper #21-277

What are the steps for installing the 21-200 pivot bracket? It seemed obvious -- put the bracket onto the track and then tighten the screw until it pierces the metal hole(?) -- is that it? I tried to do this with a flathead screwdriver and the screw isn't moving. Any help with some instructions? ... (cont.)

Hi - I have 2 metal bi-fold louvered doors; one of them is missing a couple of parts (I have pictures of the missing parts -- pictures + some comments added to them ... with the names of the parts maybe incorrect in the pics). 2 of the following (top of door): 6.5" pivot rod; 1/4" diameter; sp ... (cont.)

Hi, I have 2 closet doors with 60 inch openings. The inside spring pin for the top doesn't move,it should be "springy" right? I am guessing that I would need 4 tracks, 2 top, & two bottoms? and four corner brackets and 4 springy pivots. The stationary pivot guides seem to be in good shape, and t ... (cont.)

The mechanism that holds the bi-fold metal door in place in the top track is broken. Inside the door is a label that says: Evans Products Company Door Systems Division Roseville, Michigan 48066 Model "E" Door - Oct. 25, 1976 The metal unit that keeps the door in place will not tighten/secure wit ... (cont.)

Dear Customer Service, I am doing a renovation and do not want to change the metal bifold doors. I am trying to identify the correct replacement parts for National doors, and would like to purchase a complete set (including channel, if available)for each door. I have attached a picture of the ... (cont.)