Viewing all customer Discussions for:

21-401 Bifold Track, 3' Opening

Here are some pictures of my older bifold doors, if you can identify them, I need a list of the two top and two bottom pins I guess? Anyway, feel free to reach out thank you guys.

I need those pins and brackets for metal bi-gold door

Have a lot of pins and grommets needed to fix 10 closet doors

Hi I need to replace hardware in all 6 doors. Please help to identify what i need Thank you so much

I am needing hardware for a project that we are working on. They are metal louvered bifold doors. Needtop and bottom hardware for 1 set. I have attached pictures of each. I estimate the home to be built in the 1920's but not sure when the doors were added, possibly original. Any and all help would b ... (cont.)

I need to get the correct bottom track. I was looking at your low profile track to place directly on new tile that we installed and want to find the correct one to work with these doors. I also might need to hardware for the doors themselves. I am attaching photos of the doors, the current track ... (cont.)

Hi, the assembly part of my bifold glass doors broke I want to replace all the hardware What pieces should I get? The track is quite small, opening of 1/2 an inches And the bottom assembly is broken on one but I'd like to replace them all I live in Canada if you can ship here, thank you ... (cont.)

Hi, We are looking to replace hardware for our metal mirrored bifold closet door 3' opening. Attached is a photo of some of the hardware pin & slide. The door has to tracks top & bottom and was installed in the 1980's. Thank you. Rodger & Ivy

Hi Ron looking to rebuild how thanks.

Hello, Would you be able to assist me with locating and ordering parts for the referenced doors? I'm looking for the following components to install the Benchmark Steel Bifold Doors. Tracks- (1) 24" & (1) 36" Hardware- all components needed for the doors to swing. Please note, I've added photos o ... (cont.)

Looking for replacement part for lower pin on older metal Slimfold mirrored bifold door. I think the door model number is 25273062 (picture is attached) The existing pin that is bent is 6 1/2" long as show in the attached picture(pictured next to tape measure). I tried getting the one in the box tha ... (cont.)

I purchased the bifold track 21-401, I need to know what screws to use, I have to secure into cement, I do not know what size to get.Vickie

Hi, Do you have any suggestions for a new track & pin system to work with existing Leigh bifold doors? My neighbors keep getting rid of their doors and not putting out the tracks with them! I painted one set and had something that kinda worked, but with limited bottom supports and the disk tops a ... (cont.)

Hello, To Whom hom It May Concern I am looking for the top track for a 30 ' wide mirrored bifold door keeping in mind that the pivot are about 2' in length Also need the bottom pivot bracket, Please advise

I have Benchmark metal bifold closet doors. I need the Primeline part from Lowes that's part number 795884. A Swisco person said I should start with the 21-044 and I think that's a good match. But he would not give me all of the parts I need. I need all of the parts I need to install my door. ... (cont.)

i have a pair of 24" metal bi fold doors and based on the pics i need the following parts so i know what to order: -top pivot pin -top rolling pin -bottom pivot pin -bottom rolling pin -48" top track -48" bottom track

Hi, The following photos are of an older bi-fold door missing the lower track for reinstallation, the photos include the manufacturer, the door itself and the bottom of the door. I have a few of these doors both 24" & 36" and I'm looking for the lower replacement track for all. I believe the 36" ... (cont.)

hi there, i have two different types of floor to ceiling old metal closet doors. i need to install them but i'm unsure which pieces they both need. i redid the floors so i'd love to have them only need a track on the top if possible. the height is about 94" tall and the width of each closet is aroun ... (cont.)

Hello Swissco. Need floor track,looks like a two-piece system. The pictures attached may need a different angle to view properly. Thank you for any advice on this issue.

I Need another metal post and the plactic tips. I just do not know what size will replace it. I also need 2 new spring post to click them into the top. This is for an 66 years old garage furnace closet. The doors are nolonger bifold, they where fused together so they only swing out pivot like a ... (cont.)