Viewing all customer Discussions for:

23-003 3/4" Offset Door Roller, 3/4" Dia.

Need 2 pair sliding wood bedroom closet door wheels. This hardware is about 48 years old. The each closet door is 80" x 30".

It's a 1 inch offset with a 7/8 nylon wheel.

HI Swisco!I received an order a set of front and rear closet door roller hangers.I need the same offsets for both front and rear but need the smaller roller wheel (2mm) as these are for older doors and track.Picture attached.Can you help and thank yo in advance!John

Wheel seems to be worn

Need replacement roller wheels for wooden closet doors. Plastic wheel 3/4 in. O.D.

The order that was sent was not the right ones. It has a 3/4 roller and 7/8s. This is the 3rd time sending pictures. Please let me know if you can help. See the 4 photos sent above. Any questions please callThomas

Hi- We are looking for replacement door brackets/rollers marked Grant Rocket 1013. They have an approx 1" offset and a 3/4" wheel. Do you offer anything like this or have another suggestion for us? If we can't find a replacement would we remove the tracks and just buy something that fits or buy ... (cont.)

As you could see, I need to replace my 2 door hangers closet, with 3/4" offset and 3/4" of diameter for the wheel

Has Stanley 1 number stamped on it. Would love to have a replacement part that would work

Hi, I need a few 1960's Stanley Rollers with these dimensions: Outside wheel dimension: 3/4" Inset of Roller over door: 1/4" thanks, Vinit

I'm looking for a roller replacement for a closet door. I believe my doors are 1 3/8 wide, and the wheels are 3/4. So I'm looking for a roller that is 3/4 with a 11/16 offset ? Can't seem to locate one on your site. I did receive part 23-003, but wheels did not reach center of door. ... (cont.)

I was reading your other posts and it appears that they no longer make a 7/8 inch offset. You have recommended either a new track system or the 23-003 which is a 3/4 inch offset. If I were to buy the 23-003 what may go wrong? We are talking an 1/8 of an inch will it really be a problem? I know a ... (cont.)

I have two very old solid wood louvered sliding doors and I am looking for heavy duty adjustable wheel assemblies. The pictured hardware came with the doors, but is missing the adjustment plate. The big box stores don't appear to have anything to replace these. Do you have anything I could use to re ... (cont.)

Roller is 3/4" diameter with offset of 7/8" inch when measured from the inside of the offset; 1" when measured from outside of the offset. I've tried to upload Need replacement ASAP as I'm trying to sell my house. Will pay for expedited delivery/service. Tried to upload photos but kept "Connecti ... (cont.)

i need some replcement parts for my sliding closet doors it has acme hanging rollers part # 8901 and 8902.

I need Harvey Closet sliding door rollers. With 3/4" offset. The rollers are ROUND. Thanks

Part# 8901

7/8 roller dia 7/8 inch offset Need 2 sets of 2pc

I need to rehang closet doors that were removed quite awhile ago. Two rollers are intact, but the other two are missing. These are luann doors about 1-3/8" thick. The nylon rollers are 3/4" in diameter. Offset of the one pair I have in hand is 7/8" inside measurement, 1" outside to include the width ... (cont.)

My closet has Har-Vey Challenger rollers with 3/4" diameter wheels and a 3/4" backset. The wheel surface is rounded. I need replacements. The only 3/4"-3/4" combo I see on Swisco has a flat wheel. ?