Viewing all customer Discussions for:

15-181 Double Support Detent Clip

Just bought this house and have several window coil balances broken. Not sure what type of vynl windows I have but they tilt inside. House is about 12 years old. How do I determine which replacement parts I need? Pictures below Thanks, John

I need help in locating/purchasing a broken window balancer. I have attached a photo. Thankyou, Joel

I attempted to order a replacement coil balance for my window but it is a two-coil and what I ordered was a single coil. I have attached photos of the balance. I have included several pictures including one with the '9' shown on the coil. Window size is 34 1/4 x 33 5/8. Any recommendations? Ther ... (cont.)

I need to order coil balances. I know I need shoe #15-180, spring #S190-640 (2 for each shoe, I assume), clip #15-181, screw #33-072 (2 per shoe, right?). My question is, how do I know what else I need to make a complete balance? I have a sample in front of me, but it may not be complete. Do I n ... (cont.)

Hope you can help. I have Capitol window, single hung, insulated double pane window with vinyl frame, tilt-in lower sash. The window is big 36" x 72". Sorry but I cannot find a style number or any other identifying info. The mechanism in the side track that allows you to raise and lower the windo ... (cont.)

Thanks for posting! Before I can offer an applicable replacement for your hardware, can you tell me if there are any stamps or markings printed on your coil springs?

Please excuse my ignorance of the technical terms! The bottom plastic piece of the coil balance assembly is cracked (see bottom of picture). This is the part that the "foot" on the window would sit in, but it slips right through the crack and the window won't stay in the open position. This is an ... (cont.)

The enclosed picture shows what may be a Capitol Window. The builder of the house referred to Capitol and I researched and found MI Windows and Doors make a coil balance that appears to be identical to the one in my picture. You show parts that look correct, but the balance shoe has a plastic lock ... (cont.)

I have single hung windows that I believe were manufactured by MI Windows and Door in the mid 90's. They have a mfg code of MTL-6. The balance spring has broken on some of them and I can't figure how to remove the spring after I remove the bottom window. I have removed all the screws holding the ... (cont.)

hi there, i've attached some pictures of parts i need. based on what i see your site it appears my windows may be certainteed? would these be the correct products based on the photos below? 26-352, Pivot True Pivot Bar 15-150T, Constant Force Coil Balance Triple Support 15-150D, Coil Balanc ... (cont.)

I had a window made by MI Windows and Doors, Inc. and the coil balance was broken and could not hold the opened windows. The window is MI 8500 series (WxH 85in x 75in). How can I identify the right coil balance parts from yours and replace with the broken ones. Your help is greatly appreciated. ... (cont.)