Viewing all customer Discussions for:

15-181 Double Support Detent Clip

Please excuse my ignorance of the technical terms! The bottom plastic piece of the coil balance assembly is cracked (see bottom of picture). This is the part that the "foot" on the window would sit in, but it slips right through the crack and the window won't stay in the open position. This is an ... (cont.)

The enclosed picture shows what may be a Capitol Window. The builder of the house referred to Capitol and I researched and found MI Windows and Doors make a coil balance that appears to be identical to the one in my picture. You show parts that look correct, but the balance shoe has a plastic lock ... (cont.)

I have single hung windows that I believe were manufactured by MI Windows and Door in the mid 90's. They have a mfg code of MTL-6. The balance spring has broken on some of them and I can't figure how to remove the spring after I remove the bottom window. I have removed all the screws holding the ... (cont.)

hi there, i've attached some pictures of parts i need. based on what i see your site it appears my windows may be certainteed? would these be the correct products based on the photos below? 26-352, Pivot True Pivot Bar 15-150T, Constant Force Coil Balance Triple Support 15-150D, Coil Balanc ... (cont.)

I had a window made by MI Windows and Doors, Inc. and the coil balance was broken and could not hold the opened windows. The window is MI 8500 series (WxH 85in x 75in). How can I identify the right coil balance parts from yours and replace with the broken ones. Your help is greatly appreciated. ... (cont.)