Viewing all customer Discussions for:

24-737 Andersen Sash Balance, 725, 727, 731, 737

Hi, my name is steve. I need to replace several of the Anderson window balances in my windows. I found your you tube video very insightful. I have two different size windows throught my house. After removing the top plastic pieces, I found the following numbers on the existing broken balances: ... (cont.)

Width 6.25 Depth 3.0 Stamping D51 7#31 7-77 Double hung window balancer

BD 16 7#27 12-86 is stamped on the bottom. I assume the 12-86 is manufacture date. 11600-17 and 11600-3 are also stamped on the balancer.

approximately 6.25" x 2 7/8". windows are about 40 years old.

This picture is the best I can get of the numbers on this sash balance unit. I can't match the numbers to anything listed on your page. I have many windows of idental measurements and these things are breaking/tearing. I'll need at least 8 units (4 windows worth) to start with. Thanks. Nate ... (cont.)

The window balance # 24-737 - is there a right and left or is it universal? What is the major difference with all the balances, is it the spring strength? Also are the dimensions of the unit, height, width,length, the same on all balances? Thank you

11600-17 Anderson Window Corp D59 7 #27 4-86

The only identifying number I see on my anderson windows that need to have the balances replaced is 86/1. How do I know what balance is the replacement without taking the entire window apart to look

I am not sure which balances i need to replace the pictured ones. They measure 3 in. by 6 3/8 in (without the tab).

Looking for a Anderson window balancer . The # stamped on is 7427 885 . The glass area is 24 7/16 by 23 15/16.

What is the current replacement part for a 11600-2 D71 7#27 6 78

The stamp appears to be D 52 7/27 136 It is the right side balancer as viewed from the outside. Any help identifying this part will be greatly appreciated. I will also need the left side. I am sending 3 pictures to your customer service email address. The mesurements are 6 5/16 not including flange ... (cont.)

Please help me identify this balancer. It is circa 1985.

window measures 16"x36 1/2", window 35 yrs. old, no. on sash balancer is D69 7 #27 6 7, or 11600-2, need two rights and two lefts. No. on Andersen window corner is 78/1 if that is any help.

I would like to know which counter balance for an Andersen window to get with the numbers 11600-2 and D56 7#31 7-82. Attached is a photo of the counter balance that is there now. Let me know if you need any other info. Ruth AW Andersen Corp. BAYPORT, MINN.

Good morning, I need to replace the above sash balance. Can you identify the product ref / cost for me so I can order. Should I replace both; the other works at the moment. Finally, anywhere I can pick one up in the RI/MA area? Thanks, Sean.

Good morning! I need to replace an Andersen sash balancer with the numbers 11600-2 and D12 7#27 580 printed in it. I just want to be certain I am ordering the correct match.

This is an Andersen DBL Hung from a 1978 home. The glass size is approximatily 32.5" x 20". I need to replace the balances on one window I am hoping you can identify the type from these photos Dan

Hall Bath: Double Hung Pane 32 1/4 X 16 Master Bath: Double Hung Pane 24 1/4 X 20 Please tell me what sash balances that I should order to repair these two windows. The stampings on the ledges of the parts are shown in photo. There is an additional stamping that says 11600-17. These windows ... (cont.)

Good morning, I could not find my Anderson balance identification # on your website for the replacement one I needed. The number stamped on my balance is J5 5#23 684. Would you have any suggestions of one I could use instead if my number is not available? the measurements of my balance in ... (cont.)