Viewing all customer Discussions for:

81-149 Stainless Steel Sliding Glass Door Tandem Roller

Rollers for 2002 Milgard Sliding Glass Door

Looking for appropriate rollers. A few match not sure if there is a big difference between your 81-182 and 81-149. Thank you

Are these available?

Appears to be a Truth hardware roller 30410

I need new rollers for a weathershield slider. Slider was installed in 1995.

made in U.S.A TRUTH31761A 1980 U.S.PAT. 4.194.266 1982 CAN.PAT. 1.126.579

We purchased a house and the patio door is super hard to open. The track comes out and it is apparent the front roller is broken or off track. Can you direct me to the type of rollers and replacement track I would need? I need the track actually as well. It is broken It is an 8ft piece There ... (cont.)

There are two of these on this door. The photos are from the one that works, the other is totally frozen up. No discernable markings on the unit

I have a customer who was installed years ago before our store opened and a different location had done the installation. The customer is requesting replacement rollers but due to lack of information provided when I received the file and no serial numbers on the products we are running into dead end ... (cont.)

Need rollers for a traco sliding door but unable to find the serial #

I'm looking for the roller assembly for a Doormaster sliding glass patio door. Dimensions are:Width: 5/8" at the widest point; 1/2" at the endsHeight: 1 1/4"Length: 6 1/2" overall; 5 3/4 from center of one screw to the center of the otherWheel diameter: 1 1/4"Wheel material: MetalThanks for your hel ... (cont.)

Hello, I do not know the manufacturer of the sliding glass door. The door has two holes in the front and no screws in the sides for adjustment. So, I think it uses one of the tandem roller designs that you have. I think it is one of the following: 81-018, 81-128, 81-141, 81-149, 81-182, 81-188. A ... (cont.)

Hi your model Stainless Steel Sliding Glass Door Tandem Roller Product Code: 81-149 has the same demensions at my MI Door roller but it does not have the alumium part on the top of the roller will your model work in my door? Are the parts available? Thanks John

I have a Gorell sliding door. Both sets of the wheel systems need to be replaced. They are about 4.75 inches long. The door is about 10-12 years old. Unfortunately, I do not have a model number Thank you, Bob

I'm looking for rollers for Republic Sliding Door and also rollers for the Screen Door. Do you have either of these available. If so I would need to have them shipped overnight, I will pay for shipping. Thank you Mark

We are a Glazier company in Sweden. We have supplied and fitted thousands of sliding doors in Stockholm, Sweden. In the next few years a lot of them will need wheel replacement. For many years we have bought TRUTH 31761A wheels for sliding door from a supplier in Sweden. They now have stopped sel ... (cont.)

Dear Swissco, I need your guidance on what to purchase for rollers and track Pictures attached

I need a set of rollers for a windoor 8000 series door. Thanks Randy

Your 81-182 SS Patio Door Tandem Roller sure looks like what I wish to replace and I'll add a photo for your review and comment. I'll need 24 of them. Many thanks for your reply.Regards,Cyrus

I need two of these rollers. I do not know the name of the door manufacture but a name on the rollers is Hialeah FL. You can see that on the Side_1 file