Viewing all customer Discussions for:

81-149 Stainless Steel Sliding Glass Door Tandem Roller

I have a sliding glass patio door that is getting hard to open. I took the roller off and greased it but it did not help. I need two sets of the attached roller. I forgot to measure it while I had it off. I do have the US patent number 3996643 if that helps. If you need me to measure it let ... (cont.)

Hello, I need to replace 2 Tandem Roller Assemblies for the above doors. I have not removed the door yet because I have to remove 3 box screens and 2 other glass door panels to remove the one that needs roller replaced. The Overall Unit is 212" x 80" (OXXXXO)with a Hi-Rise Track. Can ... (cont.)

Need assembly to fit Anderson PS8068 8' patio door. Door was installed in 1974.

Replacing all rollers for two very heavy wood and glass Norco patio sliders. What is the weight recommendation for the 81-018?

Hello -- I have a 6000 series Gorell sliding patio door, installed in 2005. I think the rollers need replacing because the door is now difficult to slide and feels "heavy" to move; when new it was effortless. Does your company have replacement rollers for these doors? I know Gorell went out of bu ... (cont.)

Need replacement part for sliding door tandem wheels part number 30410 or patent number4194266 need asap

I need to replace this roller as the barrings are gone there is no part number

Need to replace 12 of these. Swisco recommendation is 81-170. Unlike the Truth 31761A, the offset mounting tabs are bent up,not in line with the bottom of the housing. Your 81-018 has tabs that are in line with the bottom of the housing and looks like it matches the Truth 31761A better. Question ... (cont.)

I would like to order 6 tandem rollers, either #81-018 or #81-149. They are the same, except for the second one being stainless steel. My existing track is stainless steel, so I would like to know if the lesser expensive rollers would even be an option for me, or if the stainless steel ones are ... (cont.)

We recently purchased a home and have found that the sliding glass door with one wheel that does not support it...the door was made by Kolbe and here are some the specifications listed on it NFRC 09211ZpSX 461000 KKM-N-106-041-01 089148-001S.O. 89148001-1 L401 Patio Door I have

I'm looking for a diagram (or a video) showing how the MilGard Stainless Steel Rollers for sliding glass door are installed, prior to removing my door (for replacement). Does Swisco sell this replacement part? If so, the rollers I have found show two 'tabs', are they for securing to the door (and ... (cont.)

I have a Gorell Doorwall model 6002. I need rollers for this door and was wondering if you have them and how much are they?

Hello, attached is a photo of the glass sliding door tandem roller assembly that I need to find. I am sorry, I don't have the measurements. The assembly is approximately 4" long x 2" high. Please advise. Thank you, Jim P

1ST POST HAD 3 PICTURES AND DIDN'T GO. 1 PICTURE ATTACHED. GOT TO BE PART # 81-149. ALL MEASUREMENTS MATCH. ANY IDEA WHERE TO GET THE WEATHER STRIPPING THAT IS IN THE SAME CHANNEL AS THE 2 SETS OF ROLLERS. I DAMAGED IT PULLING OUT A ROLLER. CHANNEL IS 3/4" BY 35 1/2".

I just wanted to be sure that I have the right part number when I order. Thank you for your help!

I need new rollers for my Anderson Perma-Shield Frenchwood Patio Door. I purchased it in 1992 and the rollers are worn out. I have the papers to the door but there is no item number. Can you help me?

2 off patio door rollers part no.truth 31761

This hardware was built into a set of very heavy custom wood/glass sliding doors in 2005. Do these rollers require lubrication or other maintenance? Thanks.

Hurd service told me that all their sliding doors old and new use the same rollers so is your part number 81-149 and 81-018 that you say Hurd uses for their doors the correct replements??? size/quality/fit/etc??? Thank You

I ordered item #81-149 and had to return them because they did not fit deep enough into our existing sliding glass door. I was about to order the reverse mount ones but in looking at the picture these appear to mount entirely outside the window. Our current rollers are the same as the 81-149 except ... (cont.)