Viewing all customer Discussions for:

23-135 Bottom Threaded Pivot

I am looking for this part, it is the one that is the main pivot, it bascically hold all the weight of the door, it is the one that the screw goes in to adjust the door in the opening, there is a insert in the to accept the adjusting scrrew, cant find it anywhere

I was thinking maybe a metal plate across the bottom of the door, with a screw to replace the pin the first picture you can see where the door on the right has the pin in place as needed. The one on the left is the one that is missing the bottom pin also a close up of the pin

I don't see a name of the company, the track is approx. one inch I would like to replace the whole tracking system

The wood gave way on the bottom of this bi fold door. Is there a bracket for the guide that will give support for this guide? This seems to be an easy fix if there was a metal plate that fit across the bottom of the door that would support the screw in support. Thanks for your help. Brad ... (cont.)

I need a bifold door top bracket that is wider than the 7/8 in brackets commonly available. The interior of my top channel is a full 1 inch. A 7/8 in top bracket slips out of the lower flanges of the track. Thanks!

Do you carry this part? It is the piece that fits into the bottom track mounted next to the floor for a bi-fold door. This part is 1/4 20 and 2 inches long. I need the same one only longer, at least one half inch longer. We got new floors and the new flooring is thinner than the old, hence the need ... (cont.)

I'm looking for the plastic housing that this screw sits in. I have the screw and the 17-4405 corner block for my bi fold mirror door. I can't seem to locate it anywhere else.

I need a replacement for the above part. Can you help me

Bi-fold door is about 30yrs old. I am unable to locate this exact part. Do you carry it or have a similar part. I am concerned because of the circle of indented metal on the screw. Entire length is 2 inches. Width of center circular bottom is 3/16 & larger circle is 10/16. Thank you. Sue ... (cont.)

I took the 2 panel door down to paint and misplaced the hardware and can't figure out how to get it back on track.

Thank you for your excellent service and products! I just ordered a bunch of window balances and associated parts. Please look at the attached pictures and let me know if/how to adjust this type of auto-close door hardware so that it works again.

I have two bifold doors Each measure 29 1/2" when opened Do you have a hardware kit to hange both in one opening What is the recommended finished opening for these doors

The tile people removed the bottom bracket where two sets of bifold closet doors stand side by side. They threw it away. The top bracket is in place. I cannot put the doors back without a bracket that will accept the bottom pins of the two sets of doors.

I am replacing my bifold doors with new doors and the track that is currently there is larger than is compatible with the doors that I am going to install. I need a track that will fit a 7/16 size pin, but there is not a width listed on these tracks. Are your 23-250 the correct tracks for my doors? ... (cont.)

I am looking at bifold door hardware and I am wondering if some of the hardware is made out of aluminum. Like for example 23-114, 23-112, 23-139, 23-135, 23-506. And I am wondering if this piece, 23-312 is made out of some sort of steel or not.

I am looking for the base plate for a pivot pin matching 23-113. 23-301 appears to take a geared pin, not a smooth one. Will this part work or do I need a different one?

The corner of rail is cracked. The rail width is one inch, however where the rail is crack it is 1'1/4-3/8". The rail is 35 1/2inches by 1 inch wide and half inch depth. The rail she'll installed in closet door is 7/8". I need the entire rail, plastic rail wheel (7/8) and any other hardware you ... (cont.)

What kind of tool can I use to unscrew the screw part (my example is screwed all the way in but I need to make a height adjustment)? What kind of tool can I use to remove the entire pivot assembly and insert a new one?

I have a 20 year old Monark Mirror closet door The leading guide is worn out. The parts list calls it a captured guide. It is fitted to a 1/4"X20 screw with a phillips head. I need to replace the guide. Do you carry them?

Hello - I have a bifold door purchased in the early 80's. The bottom pivot pin has gotten lost and I can't find a replacement. It isn't the little pivot pin, this one is about 1/2 to 3/4 in diameter. Unfortunately, neither the door, nor the part have names/numbers. Do you recognize it and mi ... (cont.)