Viewing all customer Discussions for:

87-181 Tandem Roller Assembly

please help me find these sliding window rollers

There are two per window on the top and per window on the bottom. As you can see they're rusty and it's difficult to slide the windows back and forth. There's four per window and we have five windows, we're looking for a minimum of 20 of these roller assemblies. Richard

I need several rollers for aluminum sliding window built in 1994 by BetterBilt in Phoenix, AZ.

from 22 year old better-bild window. your 87-181 works on most of our windows but a few are different. please see attached photos. DOUGLAS

I had these windows installed in 83 84 and I am looking for the rollers for a Better Build window. I believe that is the name of the company. Are these still available?

Looking for replacement roller assy. for 36"x36" bathroom window. no identifying markings. Home constructed in 1992. the roller is brass approx. .375 dia. thanks, Doug

Hello , please let me know if carry this part. Thanks,

Hello:Attached are five photos of the double brass rollers with plastic housing from my metal framed sliding glass windows. No names, numbers, or markings found. The brass rollers are 3/8 inches in diameter. The windows were purchased and installed by the home builder in late 1990, brand name unk ... (cont.)

Two brass rollers mounted in nylon bracket held in the bottom corner of the sliding window. Brand of window was Avanti installed in Arizona.

I have seen several discussions with people asking to get replacement rollers for their Better Bilt windows. You always end up recommending part 87-181 which is the correct dimensions, but it has steels rollers. I spent considerable time a couple years ago filling and leveling the aluminum rails in ... (cont.)

Looking for the roller for an 1998 house attached is a picture of it. Thank You Dale

Picture 6238 top view, 6239 side view, 6240 bottom view. Picture 6236 window with rollers and housing in place. Picture 6235 window without rollers and housing. The roller diameter is .376" I need to replace windows with new rollers and housing. Let me know either way if you have needed hardware. T ... (cont.)

I'm looking for the tandem brass rollers for my dual pane Better Built Window Series 810. I bought my windows in 1993. I would like to order 12 rollers. Brass Roller: 3/8" high (diameter) x 9/16" wide with axle. Tandem plastic holder: 9/16" bottom width x 1 5/8 long x 5/16" high Thank ... (cont.)

I received my 87-188 rollers today, and it looks like I guessed wrong on the fit from the pictures. These plastic frames are smaller than the frames from my Better-Bilt dual-pane sliding windows. My fault, but do you have another model that is larger and might fit? I've enclosed a picture of ... (cont.)

18 year old aluminum window, two pieces per, sets on a piece of removable nylon inserted in the track area. _ Track is shaped like this / \ No markings/identifiers on the windows that I can find. I would appreciate any help you can give me. Thank you.

Regarding the attached pictures: (Locking latch says Philips on them) I believe that Philips is out of business? - Looking for Vinyl Window Runner - Looking for Sliding Window Roller: Screw hole to screw hole 1.25" Width: 5/8" Length: 1.5" Roller width: Btwn 1/4" & 3/8" - Locking latch. I ... (cont.)

I am looking for replacement roller assemblies for Better Bilt aluminum sliding windows. The dimensions are as follows: DIA.= 3/8

I can't find a replacement brass roller for my Better Built sliding window , house was built in 1996. Part is 1.5" long, 8/16" wide, brass rollers are 5/16" wide. I need a ski number so I can order from you . Thank you !

Just want to know the part number and where I can order replacement parts.

Greetings. I have been looking for a pair of rollers for one of our Better Bilt sliding windows. Although our rollers are brass, not steel, I believe your 16-180 Sliding Window Roller Assembly has the same dimensions and design as what we are looking for. Our white nylon platform is 1 5/8" long an ... (cont.)