Viewing all customer Discussions for:

23-198 Sliding Mirror Door Roller, 1-1/2" dia.

Max width 5/8". 1 1/4" roller. ACE marking in circle

Hello! We have determined that this is the right replacement piece for our mirror closet doors. Do you have installation instructions? It was very hard to get these out of the door to look at them to begin with. Thanks!

4 roller replacements for mirrored closet door 448-3

The dimensions of 23-232S appear to match my rollers except the height where the one I'm replacing is 1 1/2". Also, a critical measurement for me is on the bottom where the metal spreads out. I need a width of 3/4". Will 23-232S be a suitable replacement?

I would like to replace my bottom track with a convex style rather than concave, but I have the kind of roller that needs to be replaced by a 23-198 or 23-176 (side adjustment and mount). I can't find a similar style with a convex roller. Is there one?

Name on part Del Mar End.448-3 diameter is 1 1/2" Probably closest to your part #23-176

Roller replacement Help

I need min 4 wheels but if you have 6 I'll take 6 so I have a couple back ups.

Looking for a replacement for my mirror door wheel. It is a 1 and 1/2 inch plastic diameter wheel that is in a metal housing 2 and 1/2 inches long and 9/16 inches thick. The wheel has the number 608Z, and the metal is stamped DNW. It is secured with one screw.

Hello, I need replacement wheels(8 total). Home Depot and Lowes are no help. Can you please see if you carry a replacement part. The pictured metal wheel housing slides into the door frame and so there is no room for different dimensions. Thanks Safety Mirror - Monarch Mirror Door Co., In ... (cont.)

Hi, I believe the replacement part I'm looking for is most likely your 81-250, but I want to confirm before ordering them. The images don't have a plastic roller part around the bearings since this is the part that broke off. When measuring another roller, I think the diameter was closer to 3.25 ... (cont.)

I need to replace two roller, I'd like to make sure i am ordering the right part. The picture shows the roller without the plastic wheel, I hope this makes sense. Can you please let me know what is the part I need to buy? Thank you, Juan

These casters have no numbers on them. They appear to be 2.5 inches by 2.5". The wheel itself looks to be 1.5" across. The plastic wheel is stamped with ACE and with LA, CA. The sliding mirror door was made by Charmac.

Your closet mirror door wheel is part # 23-198 However, see my photo attached: The flange sticking out just above the 'phillips' screw head on my part is straight: On your part it is angled up 90 degrees and has a hole in it. Are the parts interchangeable? Thanks for your attention to t ... (cont.)

I see that you have some that are close, but not exact. Let me know if you can help. On the metal are the marking: DEL MAR ENG. 448-3 On the wheel are the markings: Production Enterprises Miami Florida

I have a bypass, mirrored closet door whose wheel broke. I pulled the mechanism and the measurements match one of your items. However, I would love verification if possible. The door was manufactured by Monarch Industries/Olander. Any help you can provide would be appreciated. Thank you! ... (cont.)

Though I remove the screw, I can't seem to get the roller mechanism out!. It seems "sandwiched" in the frame. How do I get it out? My roller looks like item # 23-198

We put these doors in the late 1980's and the plastic wheel has broken. jWe took the door off and removed the roller but were unable to find a replacement at Home Depot, Lowe's or Ace hardware. Nothing seems to attach like these do. They attach to the frame on the side of the door. Do you carr ... (cont.)

I have an RV with a metal sliding door with roller cassettes that are shot. I've looked around your site and found that my Del Mar toronto cassette most closely approximates your mirror door roller #23-198. Dimensions and shape are very close. However, my cassette has metal wheels. This is an ex ... (cont.)

I have several closets that need the wheels replaced. The assembly looks similar to your product #'s 23-198 and 23-043. My assembly has a logo of the globe with "ACE" printed in the middle. How do I select the correct assembly? Although the wheel axels are riveted, I have the ability to remove t ... (cont.)