Viewing all customer Discussions for:

70-208 Screen Latch Set, Peachtree

The pin/peg at the top of my peachtree window screen as seen in the first image has broken off several of my screens. I'm going to assume the best option is the plunger pin 70-009, but the frame on my screen isn't rectangular and I'm not sure if the plunger pin will work properly with my frame, see ... (cont.)

I have recently purchased a house in Maine that I think has Peachtree windows. I can not find any markings or numbers on the windows; all of them are double hung (non-tiltable) The outside screens uses clips to hold them on and many of them are gone. Attached is a picture of one. It is metal; longe ... (cont.)

I have peachtree windows and screens on the house. My screen use the small plastic latches similar to 70-208 and two metal posts on the top of the screen to hold the screen in place. Several of the metal posts are gone, are there specific replacement posts or would you just use a thick poprivet to ... (cont.)

I see that you have the screen latches I need; this is good. Part number is 70-208. These are shown with a flathead screw, but my screen latches have a rivet; some of those are broken. How do I put a new rivet in; or do I drill a hole for screws?

Several of the clear plastic tabs (each has a hole with a tiny screw in it so that it can be attached to the bottom of the screen) on our Patriot window screens have broken. These plastic tabs clamp the screen to the window to hold it in. How can I obtain replacements? Our home is a Ryan home ... (cont.)

How to remove old broken latch that was riveted and replace with latch set that has screw