Viewing all customer Discussions for:

39-529 Truth Hardware Track Slider

Trying to replace Hurd casement operator. Existing stamped number is 6098P. From inside of unit hinges side is left. Opens right side.

I have crestline windows that were installed in 2001. Truth is stamped on the hardware and they are dual arm however the ones i saw on the site do not connect to the bracket that is on the window. Please help if you can. thanks for your help.george

We are missing track glides for the window arms. The window does not retract without the piece.

Hi, I need to replace a window crank made Truth and I believe the model number is either 021698 or 40448. I will submit pictures. The measurements seem consistent with the models I found on here, but are missing one of the pieces this mechanism has. It has two metal bars come from the gears rather ... (cont.)

I need these for windows that open with arm cranking out they hold arm up in place shipping to pa do you have these to sell ??

We have two identical casement windows (Milgard I believe). One of them is missing its track and the slider may be damaged. So we are looking for what might work as a replacement for both the slider and track. I'm including pictures of the functioning window and the broken one. The track on the func ... (cont.)

Need part 31877 for an Anderson crank out window.

Hello, I'm trying to match this interlock window operator

If you see this part is under the bottom part of the window is the one I need thanks

Need a new operator. Looks to be 10" arm. Handle says thermalgard. Truth is stamped on arm. One bracket has 40447 on it

I can not find a window manufacture on the window - the travel guide on the bottom of the window sash is pictured the arm appears to insert in the black guide - I can't figure out how it is retained or if there is a piece missing or where to find parts

These are on Gorell casement windows that were installed about 15 years ago. Are there replacements available

White plastic, this crank is on left side of window. The only markings on it are the brand "TRUTH"

Hellow swisco. I am looking for parts and have included a pic of parts and a list of parts from your site. If someone could look them over and give me some other parts that would go along with it and confirm the list I would appreciate it thanks.

Yesterday, I tried to install my encore dual arm and discovered that the pin at the end of the long arm on the new part (see first picture) is just a tad smaller than the pin on the old existing part. When I try to insert the pin into the holder hole at the bottom of the existing window, the pin do ... (cont.)

One window has only a broken handle to the crank. The other window the crank isn't attached to the window.

I missing the glide that connects the arm to the window. Not sure if that makes sense. I have included a photo of the glide from another window. The glide should fit on the arm that isn't latching to the actual window. When I crank the window the arm doesn't remain attached to the window because the ... (cont.)

I have 2 windows that need same part. Left and Right handle side. These windows are on the sides of my large picture window in living room.

this part keeps the casement window from falling out

The crank set in the picture isn't working properly anymore. I can't get the window to close all of the way. I need a replacement part.