Viewing all customer Discussions for:

24-531 Andersen Sash Balance, 519, 523, 525, 527, 531

The balance is marked with the numbers 519 and BJ25 1288. I also see the numbers 11600-17. Please let me know if you have these balances for my window. Thank you.

Good evening, I need 2 balancers to replace In my Andersen window with numbers on my old balencers: 116000-17 and J23 5#23 1085. I found in your forum that old balancers marked with 523 can be replaced with 24-531. Just wanted to make sure that I am write about it. Huge thank you for your help. ... (cont.)

Hello, my window balancers don't match your part numbers available. I have a few numbers on the weights, which are: 11600-2 and J32 5#23 9-78 Any help and guidance would be very much appreciated. Thanks in advance.

Need replacement code or something that works with 24'x48' Need two for both sides strings

We need replacement right and left boxes for the above window, which now have broken strings.What is your part number we should use when ordering 11600 17 519 97 0994

Looking for replacements Anderson balance

Can u identify and order

I took one balance out. Along the lower corner on the visible side before it was removed I have these numbers. J53 5#31 10 79 On another spot there is 11600 on the piece. The window is 52" tall if that matters to your calculations. I didn't see numbers that looked like these in your selections. ... (cont.)

Andersen window sash replacement 11600-17 BJ 10 5 # 27 6-87 please advise the part number i need thanks

I need to replace both sash balances in an Andersen double-hung window. Numbers on the cartridges are 11600-17 and BJ19 519 8-88. Do I need the #531 replacements? Thanks.

Hopefully this photo will help

stamped on unit 11600-2 and also j54 5#23 2 80...which part do i need...thanx

I would like to find the balancer to replace balancer.Number on one side is. 11600-17 Number on other side is. J43 519 2-88 Thank you for your help. Lou

I can't find the corresponding sash balancer on line. I assume this is an old part number now. Which Anderson sash balancer would work? It is the 11600-17 5/27 1235

window size: 16"x 20.25" 11600-17 BJ9 5#19 87

You will need our 24-1033 and our 24-531 balance replacements.If you have any further questions, please let us know.

Has BJ7 5#23 Window is roughly 24 3/8 inches by 33 1/2 inches produced in 1986 Which is the correct replacement? Thanks in advance Tom

Need to replace 4 balancers J165#23585

Top right corner on metal has the following number 11600-17 Below on lower right there is a number 143 519 3-88

Can you please identify this balance? Thanks