Viewing all customer Discussions for:

23-162 Pocket Door Top Mounting Bracket

need the bottom half which attaches to door and slides into the roller part attached to the track (off set) but will gladly buy both top and bottom is only sold in a set. Thanks...

I need two of each.

I'm looking for replacement hardware for the enclosed. Do you have a suitable replacement? Thanks!

Gentlemen or ladies,Can you please identify these parts for me ?I'd like to purchase from your company.Thanks , Rufus

Not sure what the parts are called would you carry something like the attached photo Thank you for your help!

Hi- Do I need any additional parts for this broken roller- I am not certain what the small piece is or what to replace it with. I have two pocket doors that are together . I believe I need the 23-161 part. Thanks, Robin.

How long is the threaded part on this door mount.

Hello,I need a replacement for the above referenced door roller.Thanks,Dana

Hello I need two of these pocket door rollers please advise

I need to replace four 4 wheel pocket door carriers for two doors. Wheels are 7/8" wide spaced 2.75 apart and 1/2 inch from the base of the piece. What do you suggest i purchase to replace the broken and bent ones?

Hello Swisco, I am looking for a top mounting bracket that is currently being used with a Grant (pc 23-189) four wheel trolley. I can find no markings on the bracket so I am not even sure it is manufactured by Grant? It is 3.5" wide x .75" deep. Can you help identify? Thanks, Niko ... (cont.)

I need two of these. When the wheels are on I have 5/8 on center. Your 23-193 is close and would do, but I need the track. You don't sell a track and the kit that you have 23-252 is just a little too wide and throws off my spacing. Suggestions or can your shop manufacture something? You're probably ... (cont.)

It has 4 wheels. The axle to axle measurement is 2.5 inches The slot opening for the mounting bracket is 1 inch under the name "Acme" . The numbers above are more difficult to read but my best guess is 301001 The widest width across the middle of the open sided bracket is 1 inch. (You guys m ... (cont.)

The sliding door in my office came off. It has a top track and was held in position by the Grant 4-Wheel Pocket Door Carrier attachment (see attached photos). Grant Pat. No. 2783493 Looking at your site, I believe the diameter is 1 inch. However, I don't see the screw that attaches to the ... (cont.)