Viewing all customer Discussions for:

10-321 Shower Door T Sweep, Clear

This sweep in 3MM or 1/8" is clear and tapered. 36" long. If you don't have one that is tapered, I can modify. The key here is the 1/8" top of the sweep. Others that are 3/6" or larger will not work.

Hi, looking for some help to replace this brush style shower door sweep with just a plastic type sweep; the brush stays too wet and is causing mold and caulk to never get to dry in between shower uses. This brush style is 26 inches long and has a more round vs rectangle top that needs to fit into th ... (cont.)

rubber that slides in terrace doors. I think it keeps the bugs out I'm not sure.

Trying to find replacement rubber sweep for AquaGlass Shower unit. Have the metal part and screws. Dimensions shown on pictures.

How wide is your T top & how long is the piece ?

I ordered a 5/32 by 3/4 and it's to large. Do they make one any smaller than 5/32?

The sweep is too small. The old shower door flap had a sweep measuring approximately an inch long.

I'm looking for a Shower Door Sweep, T-Shape, similar to 10-321. Need the "T" to be 5/16", and the Length to be 3/4". Do you carry anything close to it?

Hello, I have two shower part inquires. Please let me know if you offer the following parts or viable alternatives. 1. Clear Vinyl T Wipe / Sweep Measuring 7/32 x 11/32 x 67 Long. Pic Attached, Framed Shower door seal, channel insert (7/32). 2. Polished Brass, Shower Door Drip edge. Pic Attach ... (cont.)

Can you please let me know if you carry shower door bottom sweep Where the sliding edge into the botttom groove is 1/8 inch and the height is only 0.5 inches

length is 15/32 " width of the T or star to fit in the slot is 3/32" ...

this is a neo angle shower adn we are looking to replace the sweep for the customer. Can you identify and give me a price on the sweep.

My front door lets in a lot of light and air. I have tried a couple of weatherstrips, but none of them fit the slot in the door. They are double doors, the door that locks in place has an extra black attachment (guessing it is called an astragal) that has a T shaped slot for the weatherstrip to inse ... (cont.)

We need a new sweep/seal for the bottom of the shower door. Its a T-shaped seal. The width of the T part is only 1/8 inch. The only seals I can find anywhere online or in stores are 3/16 wide which will not fit into the slot in the bottom of the door. The shower base is approximately 19 inches ... (cont.)

I just purchased the vinyl T sweep 10-321. the measurements are good but the "T" on the top is too small. It slips out of the groove. Do you have one with a larger "T"? Where can I find one? How can I work around this?Very frustratingThank youMary

Looking for shower door gasket for Aqua glass brand shower. Gasket is 21.5 in long and slides into a channel on a metal bracket that attaches to bottom of door with 3 screws

Please let me know if you sell a door sweep that is 7/16" thick and will insert into my existing fixed frame door. Thanks!

Hello, we are looking for the weatherstrip/seal at the bottom of sliding glass doors. The manufacturer is AAA Aluminium Stamping Inc. It is a rubber seal that is inserted under the door. Height 11/16 Insert width 2/16. Thank you for your help.

Rubber seal that attaches to the aluminum door frame that seals against the glass door when closed. Approximately 70 inches high.

To Whom It May concern: Im having trouble finding this plastic/rubber part that slides into a groove on bottom of my swinging shower door. I cant find the door model which is installed in a manufactured home. The strip is about a 1 1/4 " wide. Do you carry this product?