Viewing all customer Discussions for:

55-106-6 Weather-stripping, 6' length

This a window part I can't find is for a windows awning weather strips the dimensions are ... 1/8 5/8 1/4. 1/8 the brand of the windows is, CaradcoThanks so much for your help

Trying to confirm exact part

Hello. I am also looking to replace weatherstripping on some double hung M&W windows -- which were also installed in the late 1980s. Below are pictures. Any recommendations for replacement weatherstripping? Thank you.

My living room has 2 awning windows that have kerfs in their window frame (both sides and along the bottom edge, the top does not have a kerf). The weather stripping has been coming out of the kerfs and become damaged. The stripping has a very thin (plastic? vinyl?) flap extending out of the kerf po ... (cont.)

These are the measurements for a weatherstrip I removed from our casement windows. It was a flexible vinyl but is now sunbaked. It has become so brittle that I cannot remove a piece intact, I have made the measurements in the photo, and I believe they are accurate. This weatherstrip is from Caradco ... (cont.)

hi I just bought a new house and all the old weatherstripping around the casements windows is no good. I have no idea what type of windows min 30 years old casement wood windows the weather stripping is 1/8 x 1/4 x 3/8 need to order a lot thanx

Norco wood casement windows from 1984. I need to replace the vinyl glazing bead that slots into a channel Lon the edges of the sashesThe width is 1/2" and the length is 1/4"

Hi, I have a wooden Norco casement window that the rain seals are brittle and need to be replaced I enclosed the photos and hope you have or can steer in the right directions for replacements. I have two windows that need new seals. Hope to hear from you in my quest. Thank you

Hi, I'm looking on your website and I can't correct identity what seal or glazing strip I need. Here is a few pictures of the seal and the window track.

I am looking for replacement weatherseal that came out of a caradco casement windows installed in 1992. Measures 1/2 inch wide. The side that inserts into the window slot is 3/16 to 1/4 inch deep.

Looking for replacement weather strip for sliding windows in a patriot sunroom. Thank you, Michelle, Office Manager at Mr. Handyman of Metro East

Can you tell me where I can find this weather-stripping for 33 year old Cradco casement windows as shown in the photo? Thanks, Jay Culver

Do you carry this glazing bead in white? I would need 40 pc, 8' each

Looking for replacement weather-stripping.

I need to replace the weather stripping on the top check rail of Marvin double hung windows about 20-22 years old Hoping you can help.

I am in the process of preparing my windows for painting and want to replace the plastic strips pointed to in the attachment by poor attempts at blue arrows. They appear to be glued on and presumably replaceable. What are these called so that I can order them? I wonder if there are different flavors ... (cont.)

I'd like to replace the strips shown in the photo that are installed on the exterior side of all my windows. The photos show the strip by itself and as installed on the widows. I refer to them as insulating strips, but they appear more for holding the windowpane in. They're rigid rubber approximatel ... (cont.)

I am trying to replace weatherstripping in casement windows that were manufacturered by Jenkins in 1981. THe company no longer exists but i am noping i can find the replacement weatherstripping to rehab the windows. Thank you.

Hope all is well. I just ordered seals for our wood casement windows so I figured that you might be able to help me with approx 30' of seal that I need for a bay window. The original is a kerf mount seal (the kerf tab side is 1/4") and the slightly arched sweep side is approx 1/2"... Please advise, ... (cont.)

Refurbishing my 43 year old Truth windows. The house was built in 1980 and I assume they are the original windows. I would like to replace the weather seal as it has disintegrated on most of the sashes. The attached pictures show that it is about 3/4 of an inch with a 1/4 deep kerf thingy (my tech ... (cont.)