Viewing all customer Discussions for:

55-106-6 Weather-stripping, 6' length

I am in the process of preparing my windows for painting and want to replace the plastic strips pointed to in the attachment by poor attempts at blue arrows. They appear to be glued on and presumably replaceable. What are these called so that I can order them? I wonder if there are different flavors ... (cont.)

I'd like to replace the strips shown in the photo that are installed on the exterior side of all my windows. The photos show the strip by itself and as installed on the widows. I refer to them as insulating strips, but they appear more for holding the windowpane in. They're rigid rubber approximatel ... (cont.)

I am trying to replace weatherstripping in casement windows that were manufacturered by Jenkins in 1981. THe company no longer exists but i am noping i can find the replacement weatherstripping to rehab the windows. Thank you.

Hope all is well. I just ordered seals for our wood casement windows so I figured that you might be able to help me with approx 30' of seal that I need for a bay window. The original is a kerf mount seal (the kerf tab side is 1/4") and the slightly arched sweep side is approx 1/2"... Please advise, ... (cont.)

Refurbishing my 43 year old Truth windows. The house was built in 1980 and I assume they are the original windows. I would like to replace the weather seal as it has disintegrated on most of the sashes. The attached pictures show that it is about 3/4 of an inch with a 1/4 deep kerf thingy (my tech ... (cont.)

I purchased 55-106-6 (15 pieces)Please look at the photos. First photo shows one of the new seals installed on the horizontal with the existing seal on the vertical. The 2nd photo shows the new one taped along side the existing seal. Did I order the wrong seal?It appears the seal needs to be abou ... (cont.)

Hi! Our 20 Caradco replacement windows are 25 or so years old and now require full weather stripping replacement. The windows measure approximately 24"x 56".Can you help with this project?Ron

I'm trying to find a replacement for WENCO casement window weatherstripping shown in the photo. These are early 1990's windows (maybe JX7 model). The dimensions are appproximately 1/4x1/2 in. Bob

The window is corado. The right side of the picture is the top outside. The weatherstripping is about 1/2" wide. I have 16 windows. All are about 24 inches wide. Height varies from 54 inches to 72" Do you have this particular style of weatherstripping? I recent this due to an incorrect email addres ... (cont.)

have Peachtree casement windows, installed 1988, need weather stripping due to dry rot. Cant find peachtree dealer in this area. Any advice

Looking for replacement plastic weatherstrip to fit 1992 wooden "side-sliding" windows. 1/2in. by 1/4in. Besides the plastic strip that fits around the window sash, ( first photos) I also am looking for this corresponding plastic "channel shaped" weather strip piece that fits the inside of the windo ... (cont.)

I have 24 windows. Ireceived a sample from you 55-169. The part that slides into the track is too long. It needs to be 1/4 inch or less and the gripper part needs to be thicker. Can you help us?

Need casement window weather stripping for "no name" windows which use Truth hardware. Pictures are of the weather stripping that attaches to the kerf on the window. Hope you can help. Thanks Rich

I am looking for this glazing bead, any help would be greatly appreciated. Approximate window installation, 1970's.

Help I need to find these two window seals for my home.

I'm looking for upper and lower weatherseals for 14 custom glazed windows from mid 1980's. Probably they are Marvin or Andersen. They are marked 24P on track and say 9000/9500 series on a label. I am attacking a sketch with dimensions and shape and images of both upper and lower seals Let me ... (cont.)

Trying to identify and order these seals from widows. The works on the windows were made by Truth. the house was built 27 years ago--these seal comes from windows on an addition built 22-25 or so years ago.

This seal was used on a octagon window. Measurements are approximate since it is old and hardened. The piece I have looks exactly like the drawing of Amesbury Polypropylene Leaf Seal #1658 except the dimensions are different (as I noted on the marked up drawing). Do you have anything to recommen ... (cont.)

Does this part include the little staples to secure each end?

Balance is 26 in weather strip is 31.5.